Estimation of the Transferred Power in LCC Compensated Wireless Power Transmitters with the use of PWM-Synchronized Sampling Technique

In this paper, a new technique of synchronized sampling to estimate the transferred power in wireless power transfer (WPT) systems is proposed. Defining demand factor as a criterion linking unknown receiver parameters to the transferred power, it can be estimated by measuring the front-end variables of the transmitter LCC compensating network. Moreover, with the use of this technique, one does not need to know how the mutual inductance or load varies. As the demand factor is directly linked to the transferred power, the estimation of the demand factor can be considered as an increasingly effective way to control the flow of power in wireless power transfer systems. To prove the validity of this approach, a WPT system equipped with an LCC network to compensate the transmitter, and a series capacitor to compensate the receiver, is experimentally built and tested, and the results show a close consistency between the measured demand factor and the transferred power.

Description

Publisher Copyright: IEEE

Keywords

Impedance, LCC Compensator, Load Estimation, Power electronics, Power Estimation, Resonant Converters, Soft-Switching, Transceivers, Transmitters, Transportation, Wireless communication, Wireless Power Transfer Systems, Wireless sensor networks

DOI

10.1109/TTE.2021.3098643

Citation

Farajizadeh , F , Vilathgamuwa , D M , Jayathurathnage , P & Ledwich , G 2022 , ' Estimation of the Transferred Power in LCC Compensated Wireless Power Transmitters with the use of PWM-Synchronized Sampling Technique ' , IEEE Transactions on Transportation Electrification , vol. 8 , no. 1 , pp. 710 - 722 . https://doi.org/10.1109/TTE.2021.3098643

Permanent link to this item

https://urn.fi/URN:NBN:fi:aalto-202110069502

Collections

[article-cris] Sähkötekniikan korkeakoulu / ELEC

Show all metadata