aalto1 untyped-item.component.html
Painekalibrointijärjestelmä avaruusinstrumenttien testauslaboratorioon
Loading...
URL
Journal Title
Journal ISSN
Volume Title
Sähkötekniikan korkeakoulu |
Master's thesis
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
Major/Subject
Mcode
ETA3001
Degree programme
Language
fi
Pages
89 + 8
Series
Abstract
Ilmatieteen laitos on rakentanut ja toimittanut paineenmittausinstrumentteja useisiin planeettaluotaimiin ja instrumenttien kehitys jatkuu edelleen. Näiden instrument\-tien testausta ja kalibrointia varten IL:n avaruuslaboratoriossa on oma painekalibrointijärjestelmä. Tämän opinnäytetyön tavoitteena oli selvittää, onko paineensäätöjärjestelmä mahdollista korvata kaupallisella ratkaisulla. Tässä työssä määriteltiin vaatimukset paineensäätimelle, tutustuttiin kaupallisten paineensäätimien tarjontaan ja hankittiin kaksi paineensäädintä testattavaksi IL:n avaruuslaboratorioon. Paineensäätimille suoritettiin suuri määrä käyttötestejä, joilla haluttiin varmistaa säätimen toiminta kaikissa olosuhteissa, joita paineinstrumenttien testien aikana tullaan tarvitsemaan. Paineensäätimet myös yhdistettiin etäyhteydellä tietokoneeseen ja niillä suoritettiin automaattisesti paineensäätöohjelmia, jotka jäljittelivät paineinstrumenttien testejä. Toinen paineensäätimistä täytti lopulta kaikki asetetut vaatimukset ja tämän työn lopputuloksena ehdotettiin tämän säätimen hankintaa Ilmatieteen laitoksen avaruuslaboratorioon.
Finnish Meteorological Institute has built and delivered pressure measurement instruments for many planetary landers and the development of these instruments is still ongoing. Calibration and testing of the instruments is done in-house in FMI's space instrument calibration laboratory with dedicated pressure calibration equipment. The goal of this master's thesis was to find out if the pressure controller of the calibration laboratory can be replaced with a commercial solution. The work began by defining the requirements for the new pressure controller and finding out available commercial controllers. Two controllers were then selected and acquired for testing in FMI's laboratory. During the tests the operation of both controllers was checked in pressure conditions which will be used in future tests of pressure instruments. Pressure controllers were also connected to a computer and automated control programs were run remotely. Final result of this thesis was that one of the controllers passed all the tests and was recommended for the calibration laboratory.