High-resolution photogrammetry to measure physical aperture of two separated rock fracture surfaces
Loading...
Access rights
openAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2024-08
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
13
Series
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, Volume 16, issue 8, pp. 2922-2934
Abstract
Photogrammetry, reconstructing three-dimensional (3D) models from overlapping two-dimensional (2D) photos, finds application in rock mechanics and rock engineering to extract geometrical details of reconstructed objects, for example rock fractures. Fracture properties are important for determining the mechanical stability, permeability, strength, and shear behavior of the rock mass. Photogrammetry can be used to reconstruct detailed 3D models of two separated rock fracture surfaces to characterize fracture roughness and physical aperture, which controls the fluid flow, hydromechanical and shear behavior of the rock mass. This research aimed to determine the optimal number of scale bars required to produce high-precision 3D models of a fracture surface. A workflow has been developed to define the physical aperture of a fracture using photogrammetry. Three blocks of Kuru granite (25 cm × 25 cm × 10 cm) with an artificially induced fracture, were investigated. For scaling 3D models, 321 markers were used as ground control points (GCPs) with predefined distances on each block. When the samples were well-matched in their original positions, the entire block was photographed. Coordinate data of the GCPs were extracted from the 3D model of the blocks. Each half was surveyed separately and georeferenced by GCPs and merged into the same coordinate system. Two fracture surfaces were extracted from the 3D models and the vertical distance between the two surfaces was digitally calculated as physical aperture. Accuracy assessment of the photogrammetric reconstruction showed a 20–30 μm digital control distance accuracy when compared to known distances defined between markers. To attain this accuracy, the study found that at least 200 scale bars were required. Furthermore, photogrammetry was employed to measure changes in aperture under normal stresses. The results obtained from this approach were found to be in good agreement with those obtained using linear variable displacement transducers (LVDTs), with differences ranging from 1 μm to 8 μm.Description
Keywords
photogrammetry, physical aperture, rock fracture, predefined distances, markers
Other note
Citation
Torkan, M, Janiszewski, M, Uotinen, L, Baghbanan, A & Rinne, M 2024, ' High-resolution photogrammetry to measure physical aperture of two separated rock fracture surfaces ', JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, vol. 16, no. 8, pp. 2922-2934 . https://doi.org/10.1016/j.jrmge.2023.10.003