Profitability analysis of H2 production by water electrolysis in an integrated oxy-fuel combustion thermal power plant
Loading...
Access rights
openAccess
CC BY
CC BY
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
13
Series
Fuel, Volume 398
Abstract
Integrating oxy-fuel combustion into waste-to-energy power plants with electrolysis is a promising strategy to address waste management and reduce CO 2 emissions. However, the economic implication of retrofitting a combined heat and power plant into oxy-fuel should be compared to its conventional air-fired strategy to enhance investments for carbon capture strategies. This paper investigates the integration of a waste-to-energy combined heat and power plant with an alkaline electrolyzer for oxy-fuel combustion and its economic competitiveness against the non-retrofitted air-fired combined heat and power plant. An air-fired power plant and its retrofitting into oxy-fuel combustion were modeled using AspenPlus based on the data from a real power plant (250 MW th), situated in Finland. Retrofitting the chosen air-fired power plant required additional electric power of 320 MW el, supplemented by the grid, to satisfy the demand of the electrolyzer (372 MW). Nevertheless, the implementation of oxy-fuel combustion and waste heat recovery from the electrolyzer increased the district heating output from 154 to 350 MW th. Owing to a sensitivity analysis, it was found that the optimal exploitation of the thermal energy in the flue gas was achieved with a recirculation fraction of 70 %–80 % (70.5 % in this study). The oxy-fuel system produced a mass flow rate of CO 2 equal to 18.4 kg/s with a purity of 99.2 mol% and 2.06 kg/s of pure H 2 with a molar ratio of 2.5:1 (H 2–CO 2). The price of H 2, produced by the oxy-fuel retrofitted system, to obtain the same profit as the conventional air-fired combined and heat power plant was 1.57 EUR/kg. Due to its economic competitiveness, the proposed retrofitting into oxy-fuel combustion can be implemented on large scale, thus making a significant impact on reducing CO 2 emissions.Description
Other note
Citation
Re, M, Li, S, Laukkanen, T & Järvinen, M 2025, 'Profitability analysis of H2 production by water electrolysis in an integrated oxy-fuel combustion thermal power plant', Fuel, vol. 398, 135544. https://doi.org/10.1016/j.fuel.2025.135544