Ilmalaserkeilauksen mahdollisuudet kaupungin maastomallituotannossa
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
Insinööritieteiden korkeakoulu |
Master's thesis
Authors
Date
2024-03-11
Department
Major/Subject
Geoinformatics
Mcode
Degree programme
Master's Programme in Geoinformatics (GIS)
Language
fi
Pages
67
Series
Abstract
Laserkeilaustekniikan hyödyntäminen monissa erilaisissa kartoitustarpeissa on nykyisin arkipäivää. Maanpintaa ja sen rakenteita kuvaavien maastomallien tuotannon pääasiallisena tekniikkana on kuitenkin totuttu pitämään maastokartoituksena toteutettavaa takymetrimittausta. Tässä diplomityössä tutkittiin koko kaupungin alueelta ilmalaserkeilatun pistepilven hyödyntämisen mahdollisuuksia maastomallituotannon näkökulmasta. Työn tavoitteena oli löytää edellytykset pistepilven käytölle sekä selvittää, mikä on pistepilven ja takymetrimittauksen maanpintojen tarkkuus suhteessa toisiinsa. Työssä toteutettiin vertailututkimus, jossa takymetrilla mitattuja maanpinnan pisteiden korkoja verrattiin vastaavan alueen pistepilvestä muodostettuun maanpintamalliin. Tutkimuskohteina työssä toimivat neljää tyypillistä maastomallimittauskohdetta edustavat kohteet, joiden maastokartoitukset on toteutettu eri vuodenaikoina, minkä lisäksi niiden mittausajankohta suhteessa laserkeilaukseen vaihtelee. Tutkimuksen tuloksena saatiin takymetrilla mitattujen pisteiden etäisyys pintamallista. Tulosten perusteella havaittiin, että pintamallin tarkkuus suhteessa takymetrimittauksiin on erittäin hyvä etenkin kovilla pinnoilla. Pehmeiden pintojen osalta erot menetelmien välillä kasvavat suuremmiksi. Tulosten perusteella huomattiin myös, että erityyppisten tutkimuskohteiden tulokset ovat johdonmukaisesti linjassa toistensa kanssa. Pistepilven tarkkuuden puolesta mahdollisuudet ilmalaserkeilauksen hyödyntämiselle ovat hyvät. Tarkkuuden lisäksi laserkeilaus tarjoaa myös turvallisemman mittaustekniikan haastaviin tai vaarallisiin mittauskohteisiin. Jatkoon selvitettäväksi vielä jää myös muiden laserkeilaustekniikoiden käyttömahdollisuudet kaupungin maastomallituotannossa.Laser scanning is the most common technique in different surveying needs nowadays. Total station has remained the most used measuring technique for modeling ground surface and its structures. In this thesis, the possibilities for utilizing the entire city area covering point cloud data were investigated from the view of digital terrain modeling. The aim of this thesis was to sort out the qualifications for point cloud use, and to find out the accuracy between the point cloud and the total station data. A comparative study was made, where the ground points of total station data were compared to the digital terrain model from the same area. Four different research areas were chosen to represent the typical terrain modelling areas. The total station data for these areas have been collected at different seasons, and the time of the data collect varies in relation to the laser scanning. The results of the study were the distances between points and the terrain model. Based on the results it was observed that the accuracy of the terrain model in relation to total station data is very accurate, especially on hard surfaces. For soft surfaces the distances between the techniques increases. The results from different study areas are also consistently aligned with each other. Based on the accuracy of the point cloud, the possibilities of utilizing airborne laser scanning are good. In addition to accuracy, laser scanning also offers a safer way for measuring in challenging or dangerous areas. For future investigations there is still a need to study the possibilities of other laser scanning techniques for the surveying needs for municipal terrain modeling.Description
Supervisor
Rönnholm, PetriThesis advisor
Toijanaho, JuhoKeywords
laserkeilaus, maastomallimittaus, ilmalaserkeilaus, maanpintamallit