Nanocellulose aerogel membranes for optimal electrolyte filling in dye solar cells
Loading...
Access rights
© 2014 Elsevier BV. This is the post print version of the following article: Miettunen, Kati & Vapaavuori, Jaana & Tiihonen, Armi & Poskela, Aapo & Lahtinen, Panu & Halme, Janne & Lund, Peter. 2014. Nanocellulose aerogel membranes for optimal electrolyte filling in dye solar cells. Nano Energy. Volume 8. 95-102. ISSN 2211-2855 (printed). DOI: 10.1016/j.nanoen.2014.05.013. which has been published in final form at http://www.sciencedirect.com/science/article/pii/S2211285514000974.
URL
Journal Title
Journal ISSN
Volume Title
School of Science |
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
2014
Major/Subject
Mcode
Degree programme
Language
en
Pages
95-102
Series
Nano Energy, Volume 8
Abstract
A new method for depositing electrolyte in dye solar cells (DSCs) is introduced: a nanocellulose hydrogel membrane is screen printed on the counter electrode and further freeze-dried to form a highly porous nanocellulose aerogel, which acts as an absorbing sponge for the liquid electrolyte. When the nanoporous dye-sensitized TiO2 photoelectrode film is pressed against the wetted aerogel, it becomes filled with the electrolyte. The electrolyte flows inside the TiO2 film only about ten micrometers (i.e. the TiO2 film thickness) whereas in the conventional filling method, where the electrolyte is pumped through the cell, it flows about 1000-times longer distance, which is known to cause uneven distribution of the electrolyte components due to a molecular filtering effect. Furthermore, with the new method there is no need for electrolyte filling holes which simplifies significantly the sealing of the cells and eliminates one common pathway for leakage. Photovoltaic analysis showed that addition of the nanocellulose aerogel membrane did not have a statistically significant effect on cell efficiency, diffusion in the electrolyte or charge transfer at the counter electrode. There was, however, a clear difference in the short circuit current density and open circuit voltage between the cells filled with the aerogel method and in the reference cells filled with the conventional method, which appeared to be caused by the differences in the electrolyte filling instead of the nanocellulose itself. Moreover, accelerated aging tests at 1 Sun 40 °C for 1000 h showed that the nanocellulose cells were as stable as the conventional DSCs. The nanocellulose aerogel membranes thus appear inert with respect to both performance and stability of the cells, which is an important criterion for any electrolyte solidifying filler material.Description
Keywords
nanocellulose, semi-solid electrolyte, gel electrolyte, dye-sensitized spatial distribution
Other note
Citation
Miettunen, Kati & Vapaavuori, Jaana & Tiihonen, Armi & Poskela, Aapo & Lahtinen, Panu & Halme, Janne & Lund, Peter. 2014. Nanocellulose aerogel membranes for optimal electrolyte filling in dye solar cells. Nano Energy. Volume 8. 95-102. ISSN 2211-2855 (printed). DOI: 10.1016/j.nanoen.2014.05.013.