Sensorless self-commissioning of synchronous reluctance motors at standstill

Loading...
Thumbnail Image

Access rights

openAccess
acceptedVersion

URL

Journal Title

Journal ISSN

Volume Title

A4 Artikkeli konferenssijulkaisussa

Date

2016-09-04

Major/Subject

Mcode

Degree programme

Language

en

Pages

7

Series

Proceedings of the 2016 International Conference on Electrical Machines, ICEM 2016, pp. 1174-1180

Abstract

This paper proposes a standstill method for identification of the magnetic model of synchronous reluctance motors (SyRMs). The saturation and cross-saturation effects are properly taken into account. The motor is fed by an inverter with a short sequence of bipolar voltage pulses that are first applied on the rotor d- and q-axes separately and then simultaneously on both the axes. The stator flux linkages are computed by integrating the induced voltages. Using the current and flux samples, the parameters of an algebraic magnetic model are estimated by means of linear least squares. The proposed method is robust against the stator resistance variations and inverter nonlinearities due to the high test voltages (of the order of the rated voltage). The fitted model matches very well with the reference saturation characteristics, measured using a constant-speed method, and enables extrapolation outside the sample range. The method was tested with a 2.2-kW SyRM, whose shaft was uncoupled from any mechanical load, which is the most demanding condition for this method. The proposed method can be used for automatic self-commissioning of sensorless SyRM drives at standstill.

Description

Keywords

Flux maps, identification, linear least squares (LLS), saturation characteristics

Other note

Citation

Hinkkanen, M, Pescetto, P, Mölsä, E, Saarakkala, S E, Pellegrino, G & Bojoi, R 2016, Sensorless self-commissioning of synchronous reluctance motors at standstill . in Proceedings of the 2016 International Conference on Electrical Machines, ICEM 2016 ., 7732673, IEEE, pp. 1174-1180, International Conference on Electrical Machines, Lausanne, Switzerland, 04/09/2016 . https://doi.org/10.1109/ICELMACH.2016.7732673