State observer for grid-voltage sensorless control of a grid-connected converter equipped with an LCL filter
Loading...
Access rights
© 2014 Institute of Electrical & Electronics Engineers (IEEE). Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other work.
Post print
URL
Journal Title
Journal ISSN
Volume Title
School of Electrical Engineering |
A4 Artikkeli konferenssijulkaisussa
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
2014
Major/Subject
Mcode
Degree programme
Language
en
Pages
10
Series
Abstract
This paper proposes a simple grid-voltage sensorless alternative to the conventional PLL synchronization for a grid-connected converter equipped with an LCL filter. The grid-voltage magnitude and angle are estimated based only on the converter current and DC-voltage measurements. Reduced number of sensors decreases costs and amount of sensor wiring. The analytically derived design is validated experimentally.Description
Keywords
adaptive observer, grid-connected converter, grid-voltage sensorless, sensorless control, small-signal linearisation
Other note
Citation
Kukkola, Jarno & Hinkkanen, Marko. 2014. State observer for grid-voltage sensorless control of a grid-connected converter equipped with an LCL filter. 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe). ISBN 978-1-4799-3014-2 (electronic). DOI: 10.1109/epe.2014.6910740.