Aggregation ready flexibility management methods for mechanical ventilation systems in buildings

dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.authorMaask, Vahur
dc.contributor.authorRosin, Argo
dc.contributor.authorKorõtko, Tarmo
dc.contributor.authorThalfeldt, Martin
dc.contributor.authorSyri, Sanna
dc.contributor.authorAhmadiahangar, Roya
dc.contributor.departmentTallinn University of Technology
dc.contributor.departmentDepartment of Mechanical Engineering
dc.contributor.departmentDepartment of Mechanical Engineeringen
dc.date.accessioned2023-08-16T06:21:26Z
dc.date.available2023-08-16T06:21:26Z
dc.date.issued2023-10-01
dc.description| openaire: EC/H2020/856602/EU//FINEST TWINS Funding Information: This work has been supported by the European Commission through the H2020 project Finest Twins grant No. 856602; and by the Estonian Ministry of Education and Research and European Regional Fund grant 2014-2020.4.01.20-0289. Additional support was acquired from the Estonian Research Council grant PSG739. Publisher Copyright: © 2023
dc.description.abstractIncreasing use of volatile renewable energy sources causes challenges in balancing supply and demand. Therefore, demand-side flexibility has rising importance for system operators and balancing authorities. Flexibility management methods are needed to integrate loads like ventilation systems of different buildings (e.g., residential and commercial) into flexibility service. However, the available methods described in research papers require further development for implementation in practice. Heating and cooling systems have received much attention from researchers, but the potential of ventilation systems has been left out of focus. Therefore, this paper provides a complete set of novel flexibility management methods for ventilation systems created from an aggregator's viewpoint. The flexibility is quantified through capacity (e.i. the amount of power consumption that can be altered), forced ventilation rate duration, and the tendered price for the service. The proposed methods were tested on a building modelconstructed and simulated in IDA ICE. The data processing and flexibility management methods were applied in MATLAB. Two types of ventilation systems with different sensor configurations were considered: constant and variable air volume. Forced ventilation rate duration is calculated using energy and mass balance analysis where the root means squared error was 10 to 33 min, depending on the system type, measured parameter, and sensor location. The flexibility service pricing model was tested on the 2022 years' manual frequency restoration reserve (mFRR) activation and balance energy market data.en
dc.description.versionPeer revieweden
dc.format.extent14
dc.identifier.citationMaask , V , Rosin , A , Korõtko , T , Thalfeldt , M , Syri , S & Ahmadiahangar , R 2023 , ' Aggregation ready flexibility management methods for mechanical ventilation systems in buildings ' , Energy and Buildings , vol. 296 , 113369 . https://doi.org/10.1016/j.enbuild.2023.113369en
dc.identifier.doi10.1016/j.enbuild.2023.113369
dc.identifier.issn0378-7788
dc.identifier.issn1872-6178
dc.identifier.otherPURE UUID: d365112e-8be7-41cc-9a15-612cfc90f472
dc.identifier.otherPURE ITEMURL: https://research.aalto.fi/en/publications/d365112e-8be7-41cc-9a15-612cfc90f472
dc.identifier.otherPURE LINK: http://www.scopus.com/inward/record.url?scp=85166018330&partnerID=8YFLogxK
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/122474
dc.identifier.urnURN:NBN:fi:aalto-202308164824
dc.language.isoenen
dc.publisherElsevier Science Inc.
dc.relationinfo:eu-repo/grantAgreement/EC/H2020/856602/EU//FINEST TWINS Funding Information: This work has been supported by the European Commission through the H2020 project Finest Twins grant No. 856602; and by the Estonian Ministry of Education and Research and European Regional Fund grant 2014-2020.4.01.20-0289. Additional support was acquired from the Estonian Research Council grant PSG739. Publisher Copyright: © 2023
dc.relation.ispartofseriesEnergy and Buildingsen
dc.relation.ispartofseriesVolume 296en
dc.rightsrestrictedAccessen
dc.subject.keywordBuildings
dc.subject.keywordExplicit demand flexibility
dc.subject.keywordFlexibility management
dc.subject.keywordForecasting
dc.subject.keywordMechanical ventilation systems
dc.titleAggregation ready flexibility management methods for mechanical ventilation systems in buildingsen
dc.typeA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessäfi
Files