Corrosion behaviour of cast and deformed copper-carbon nanotube composite wires in chloride media

No Thumbnail Available
Access rights
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal

Other link related to publication
Degree programme
Journal of Alloys and Compounds, Volume 746
Copper-carbon nanotube (Cu-CNT) composite wires were produced by casting, rolling and drawing to produce composites with 0.05 wt% CNTs embedded at the grain boundaries of copper. The corrosion properties of wires were investigated in mild and highly corrosive media: solution I consisting of 0.05 wt% sodium chloride (NaCl) and 0.4 wt% ammonium sulfate (NH4)2SO4 and solution II consisting of 3.5 wt% NaCl. Composite samples showed similar behaviour and corrosion rates as oxygen free copper in solution I. In 3.5 wt% NaCl all composite samples showed slight improvement in corrosion resistance when compared with oxygen free copper. The corroded wire surfaces after five days in 3.5 wt% NaCl showed less dissolution for composite samples compared with pure copper. The observed decreased corrosion rate for composite wires with embedded CNTs is suggested to be due to reduced cathodic reaction. Galvanic current density between pure copper and carbon nanotubes was observed by mixed potential theory and zero resistance amperometry, neither of which showed tendency towards microgalvanic activity. The results indicate similar or slightly improved corrosion properties of copper containing small additions of CNTs in chloride containing media.
| openaire: EC/H2020/609057/EU//ULTRAWIRE
Carbon nanotube, Composite, Copper, Corrosion, Seawater, Wire
Other note
Hannula, P M, Masquelier, N, Lassila, S, Aromaa, J, Janas, D, Forsén, O & Lundström, M 2018, ' Corrosion behaviour of cast and deformed copper-carbon nanotube composite wires in chloride media ', Journal of Alloys and Compounds, vol. 746, pp. 218-226 .