Integration of atomic layer deposited aluminum oxide as surface passivation layer into silicon solar cell

dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.authorLi, Shuo
dc.contributor.departmentElektroniikan ja nanotekniikan laitosfi
dc.contributor.departmentDepartment of Electronics and Nanoengineeringen
dc.contributor.labElectron Physic Groupen
dc.contributor.schoolSähkötekniikan korkeakoulufi
dc.contributor.schoolSchool of Electrical Engineeringen
dc.contributor.supervisorSavin, Hele, Prof., Aalto University, Department of Electronics and Nanoengineering, Finland
dc.date.accessioned2023-11-29T10:00:26Z
dc.date.available2023-11-29T10:00:26Z
dc.date.defence2023-12-13
dc.date.issued2023
dc.description.abstractThe efficiency of the industrial back surface field (BSF) solar cells is limited by the strong recombination at the rear surface of the solar cell. The enormous number of dangling bonds on the silicon surface create recombination centers, trap the charge carriers separated by the sunlight, and thus lower significantly the solar cell efficiency. This detrimental effect is stressed in this dissertation by passivating the silicon surface with atomic layer deposition (ALD) aluminum oxide (Al2O3). It is shown that the passivation quality of ALD Al2O3 is highly sensitive to the surface condition before the ALD process. Compared with an HF cleaned silicon surface, an oxidized surface resulting from HCl solution results in a passivation layer with better thermal stability. Ozone is found to be a better oxidant than water for the industrialization of ALD Al2O3 passivation in terms of passivation quality and throughput. High negative charge density up to 7×1012 cm-2 can be reached with ozone, providing stronger field-effect passivation for the passivated surface. Increasing the concentration of ozone can improve the chemical passivation, resulting in a better final passivation quality. However, adding water dose in the ozone-based process can further reduce the destructive interface hydrogen content, thus leading to better passivation than the process with pure ozone or pure water. In addition to pure ALD Al2O3 film, various layers of materials can be deposited within one ALD batch with precise control. This thesis shows that titanium doping in the ALD Al2O3 enhances the surface passivation of silicon. In addition to surface passivation, ALD can provide good optical properties for the solar cells as it is shown that high refractive index material, such as titanium dioxide and zinc oxide, can be deposited within the same ALD batch as capping layers or anti-reflection coatings. Furthermore, a lower-cost precursor, dimethylaluminium chloride, is analyzed in terms of ALD growth and passivation quality. Better thermal stability is revealed than that with trimethylaluminum. This thesis pays attention also to the blistering phenomenon of ALD films during the post-annealing. Several suggestions are made to eliminate the blisters in the post-annealed films. Finally, PERC solar cells are fabricated in an industrial-scaled production line, which integrates a batch ALD reactor with a loading capacity of 600 solar cell wafers. The solar cell with an ALD Al2O3 passivation layer exhibits improved efficiency at 20.8%, compared to the traditional BSF solar cell with 19.7% efficiency.en
dc.format.extent66 + app. 64
dc.format.mimetypeapplication/pdfen
dc.identifier.isbn978-952-64-1480-5 (electronic)
dc.identifier.isbn978-952-64-1479-9 (printed)
dc.identifier.issn1799-4942 (electronic)
dc.identifier.issn1799-4934 (printed)
dc.identifier.issn1799-4934 (ISSN-L)
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/124680
dc.identifier.urnURN:ISBN:978-952-64-1480-5
dc.language.isoenen
dc.opnTang, Zeguo, Prof., Shenzhen Technology University, China
dc.publisherAalto Universityen
dc.publisherAalto-yliopistofi
dc.relation.haspart[Publication 1]: Y. Bao, S. Li, G. von Gastrow, P. Repo, H. Savin, and M. Putkonen, “Effect of substrate pretreatments on the atomic layer deposited Al2O3 passivation quality,” J. Vac. Sci. Technol. A Vacuum, Surfaces, Film., vol. 33, no. 1, p. 01A123, Jan. 2015. Y. Bao and S. Li contributed equally to this paper. Full text in Acris/Aaltodoc https://urn.fi/URN:NBN:fi:aalto-201808014106. DOI: 10.1116/1.4901456
dc.relation.haspart[Publication 2]: G. von Gastrow, S. Li, P. Repo, Y. Bao, M. Putkonen, and H. Savin, “Ozone-based Batch Atomic Layer Deposited Al2O3 for Effective Surface Passivation,” Energy Procedia, vol. 38, pp. 890–894, Jan. 2013. Full text in Acris/Aaltodoc https://urn.fi/URN:NBN:fi:aalto-201705113910. DOI: 10.1016/j.egypro.2013.07.361
dc.relation.haspart[Publication 3]: G. von Gastrow, S. Li, M. Putkonen, M. Laitinen, T. Sajavaara, and H. Savin, “Effect of ozone concentration on silicon surface passivation by atomic layer deposited Al2O3,” Appl. Surf. Sci., vol. 357, no. 2010, pp. 2402–2407, Dec. 2011. Full text in Acris/Aaltodoc https://urn.fi/URN:NBN:fi:aalto-201701191166. DOI: 10.1016/j.apsusc.2015.09.263
dc.relation.haspart[Publication 4]: P. Repo, H. Talvitie, S. Li, J. Skarp, and H. Savin, “Silicon Surface Passivation by Al2O3: Effect of ALD Reactants,” Energy Procedia, vol. 8, no. April, pp. 681–687, Jan. 2011. Full text in Acris/Aaltodoc https://urn.fi/URN:NBN:fi:aalto-201506013057. DOI: 10.1016/j.egypro.2011.06.201
dc.relation.haspart[Publication 5]: B. G. Lee, S. Li, G. von Gastrow, M. Yli-Koski, H. Savin, V. Malinen, J. Skarp, S. Choi, and H. M. Branz, “Excellent passivation and low reflectivity with atomic layer deposited bilayer coatings for n-type silicon solar cells,” Thin Solid Films, vol. 550, pp. 541–544, Jan. 2014. DOI: 10.1016/j.tsf.2013.10.166
dc.relation.haspart[Publication 6]: *S. Li, Y. Bao, M. Laitinen, T. Sajavaara, M. Putkonen, and H. Savin, “Excellent silicon surface passivation using dimethylaluminium chloride as Al source for atomic layer deposited Al2O3,” Phys. status solidi, vol. 212, no. 8, pp. 1795–1799, Aug. 2015. *S. Li and Y. Bao contributed equally to this paper. DOI: 10.1002/pssa.201431930
dc.relation.haspart[Publication 7]: S. Li, P. Repo, G. von Gastrow, Y. Bao, and H. Savin, “Effect of ALD reactants on blistering of aluminum oxide films on crystalline silicon,” in 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC), 2013, pp. 1265–1267. DOI: 10.1109/PVSC.2013.6744371
dc.relation.ispartofseriesAalto University publication series DOCTORAL THESESen
dc.relation.ispartofseries171/2023
dc.revPuurunen, Riikka, Prof., Aalto University, Department of Chemical and Metallurgical Engineering, Finland
dc.revSong, Weijie, Prof., Chinese Academy of Sciences, China
dc.subject.keywordatomic layer depositionen
dc.subject.keywordsurface passivationen
dc.subject.keywordsilicon solar cellen
dc.subject.otherElectrical engineeringen
dc.titleIntegration of atomic layer deposited aluminum oxide as surface passivation layer into silicon solar cellen
dc.typeG5 Artikkeliväitöskirjafi
dc.type.dcmitypetexten
dc.type.ontasotDoctoral dissertation (article-based)en
dc.type.ontasotVäitöskirja (artikkeli)fi
local.aalto.acrisexportstatuschecked 2023-12-14_0753
local.aalto.archiveyes
local.aalto.formfolder2023_11_29_klo_07_20
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
isbn9789526414805.pdf
Size:
3.22 MB
Format:
Adobe Portable Document Format