Determination of flow rate characteristics for pneumatic valves

Simple item page
dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.authorVarga, Zdeneken_US
dc.contributor.authorKeski-Honkola, Petrien_US
dc.contributor.departmentDepartment of Engineering Design and Productionen
dc.contributor.editorWang, A.B.en_US
dc.contributor.organizationTechnical University of Liberecen_US
dc.date.accessioned2017-05-31T05:58:08Z
dc.date.available2017-05-31T05:58:08Z
dc.date.issued2012en_US
dc.description.abstractThe standard ISO 6358 is often used for describing flow rate of pneumatic valves. This standard uses sonic conductance and the critical pressure ratio to calculate mentioned flow rate. Different valves can be compared by these two parameters and an accurate mathematical model of flow rate can be created for an actual valve. The presented work is based on the measurements of the charge and the discharge of a tank through a valve. Downstream pressure, upstream pressure, temperature for both supply air and pressurized air inside the tank are monitored. The sonic conductance and the critical pressure ratio are obtained from this process as inverse models for two valves.en
dc.description.versionPeer revieweden
dc.format.extent12
dc.format.extent1-12
dc.format.mimetypeapplication/pdfen_US
dc.identifier.citationVarga, Z & Keski-Honkola, P 2012, Determination of flow rate characteristics for pneumatic valves . in A B Wang (ed.), EFM11 – Experimental Fluid Mechanics 2011 ., 01096, EPJ Web of Conferences, vol. 25, EDP Sciences, pp. 1-12 . https://doi.org/10.1051/epjconf/20122501096en
dc.identifier.doi10.1051/epjconf/20122501096en_US
dc.identifier.isbn9781632661715
dc.identifier.issn2100-014X
dc.identifier.otherPURE UUID: 438e27d6-c0f2-4517-8787-035f247c2260en_US
dc.identifier.otherPURE ITEMURL: https://research.aalto.fi/en/publications/438e27d6-c0f2-4517-8787-035f247c2260en_US
dc.identifier.otherPURE FILEURL: https://research.aalto.fi/files/12978083/epjconf_EFM2011_01096.pdfen_US
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/26500
dc.identifier.urnURN:NBN:fi:aalto-201705315115
dc.language.isoenen
dc.publisherEDP Sciences
dc.relation.ispartofseriesEFM11 – Experimental Fluid Mechanics 2011en
dc.relation.ispartofseriesEPJ Web of Conferencesen
dc.relation.ispartofseriesVolume 25en
dc.rightsopenAccessen
dc.titleDetermination of flow rate characteristics for pneumatic valvesen
dc.typeA4 Artikkeli konferenssijulkaisussafi
dc.type.versionpublishedVersion
Files
Collections
[article-cris] Insinööritieteiden korkeakoulu / ENG