Effect of rotor geometry on bending stiffness variation

Loading...
Thumbnail Image
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Date
2021-01-26
Major/Subject
Mcode
Degree programme
Language
en
Pages
19
1-19
Series
Machines, Volume 9, issue 2
Abstract
Bending stiffness variation (BSV) is a common problem causing vibration in large rotating machinery. BSV describes lateral bending stiffness and its variation as a function of the rotational angle. It has been observed that BSV causes excitation exactly twice per revolution, which leads to vibration problems, especially at half critical speed. BSV is caused by rotor geometry errors if the material is assumed to be homogeneous and linearly elastic. Therefore, the study investigated BSV with harmonic roundness components, which are commonly used in industry to describe the geometry of a rotor. Hence, the results are easily applicable in the industry. The research was conducted primarily by analytical means, but also static simulations and numeric calculations were used. The results clearly showed that when the effect of single harmonic roundness components in rotor cross-sections were observed, only the second component could produce BSV. However, when component pairs were studied, they produced BSV also without the second component. If the second component was included, the profile produced BSV the most aggressively. A generated arbitrary roundness profile, including components 3-50 with random phases and amplitudes, indicated that BSV occurs always twice per revolution despite different components in the profile. The results improve the possibilities of eliminating excessive BSV in the industry, when certain components and component pairs can be avoided.
Description
Keywords
Asymmetry, Bending stiffness variation, Half critical vibration, Rotor geometry, Roundness component
Other note
Citation
Viitala , R , Tiainen , T & Viitala , R 2021 , ' Effect of rotor geometry on bending stiffness variation ' , Machines , vol. 9 , no. 2 , 23 , pp. 1-19 . https://doi.org/10.3390/machines9020023