Effect of natural thickener on printing performance over cotton woven fabric
Loading...
Access rights
openAccess
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal
View/Open full text file from the Research portal
Other link related to publication
View publication in the Research portal
View/Open full text file from the Research portal
Other link related to publication
Date
2024-05-30
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
14
Series
Heliyon, Volume 10, issue 10
Abstract
Execution of natural thickener (wild taro corm) over pretreated cotton woven fabric with reactive dye has been explored in this research work. Taro root was collected from Sherpur in Bangladesh and made into a fine powder using a grinder. Thickener pastes were prepared by using different concentrations of taro powder, then their viscosity was measured to find out the difference with sodium alginate thickener, which is traditionally used for reactive printing. A suitable thickener stock paste concentration was selected from a number of trials and depending on the result of visual sharpness of the printed samples. A suitable reactive printing method was selected between all in (1 step) and 2 step methods of reactive printing and finally the amount of thickener on the printing recipe was optimized. The color fastness to wash, color fastness to rubbing, bending length, K/S value, levelness, penetration%, print paste adds on and visual sharpness were measured to assess the printing quality. The findings indicate that when Taro corm powder is combined with boiled water, it produces a solution with higher viscosity. Additionally, a mixture of 15 % taro and boiled water yields the most distinct print outline. Comparatively, the 2-step reactive printing method offers a superior outline compared to the 1-step (all in one) method. Moreover, using 50 to 60 gm of taro corm thickening paste for every 100 g of print paste results in a higher K/S value. The results revealed that the wild taro corm could be used successfully as thickener for reactive printing. Finally, the cost was also calculated, and it was found economical as well compared to sodium alginate.Description
Publisher Copyright: © 2024 The Author(s)
Keywords
Environmentally friendly, Natural thickener, Penetration, Reactive printing, Wild taro corm
Other note
Citation
Islam, S, Akter, N, Repon, M R & Al Mamun, M A 2024, ' Effect of natural thickener on printing performance over cotton woven fabric ', Heliyon, vol. 10, no. 10, e31224 . https://doi.org/10.1016/j.heliyon.2024.e31224
