Demonstration of a simple encapsulation technique for prototype silicon solar cells
No Thumbnail Available
Access rights
openAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2020-09-01
Major/Subject
Mcode
Degree programme
Language
en
Pages
Series
Materials Letters, Volume 274
Abstract
The impact of encapsulation on solar photovoltaic (PV) modules includes insulation and protection, which alters the device performance as a function of wavelength of incoming light. Most lab-scale PV research ignores these features, but with a promising rise in front surface spectral conversion mechanisms, methods of optical enhancement and biomimetic layers makes this oversight unacceptable. To enable encapsulation of lab-scale PV, this study evaluates a simple encapsulation method. Multi-crystalline silicon (mc-Si) wafers were encapsulated using a pouch laminator and compared with a (poly)-methyl methacrylate (PMMA) front coated cell and an unencapsulated control cell. The cell's diffuse reflectance with the encapsulant exhibits better photon absorption in the UV region, which is verified from improved external quantum efficiency. Despite the loss of a small percentage of visible photons, the electrical performances of the encapsulated cells were not affected. On the other hand, the PMMA coated cells showedan outstanding photon to electron conversion, but did not result in effective charge collection. The results show that a low-cost pouch laminate at the lab scale is an adequate method for encapsulating solar cells without overly degrading performance. In addition, for short lifetime small-scale PV applications, this method represents a means of distributed PV manufacturing.Description
Keywords
Encapsulant, Lamination, Photovoltaic, PMMA, Silicon solar cells, Surface coating
Other note
Citation
V.G. Mohan , B , Mayandi , J , Pearce , J M , Muniasamy , K & Veerapandy , V 2020 , ' Demonstration of a simple encapsulation technique for prototype silicon solar cells ' , Materials Letters , vol. 274 , 128028 . https://doi.org/10.1016/j.matlet.2020.128028