The mechanical behavior of model-scale ice: experiments, numerical modeling and scalability

dc.contributorAalto Universityen
dc.contributor.authorvon Bock und Polach, Rüdiger
dc.contributor.departmentSovelletun mekaniikan laitosfi
dc.contributor.departmentDepartment of Applied Mechanicsen
dc.contributor.schoolInsinööritieteiden korkeakoulufi
dc.contributor.schoolSchool of Engineeringen
dc.contributor.supervisorKujala, Pentti, Prof., Aalto University, Finland
dc.contributor.supervisorEhlers, Sören, Prof., Norwegian University of Science and Technology, Norway
dc.description.abstractIncreasing levels of transportation and exploratory activities in the High North increase the significance of ice-capable ship designs, and the demand for them. This demand covers a wide range of ship types; such as tugs, vessels for search and rescue (SAR), patrol boats, military vessels, cruise ships, and merchant ships. Both the economically driven preference for operations in the Arctic over operations in a warmer climate, and the safety of the operations, require adequate performance prediction methods. The capability of model-scale ice and its availability and advantages in handling compared to sea ice spurred to the decision to investigate its material behavior to develop a numerical model. This model serves as a corner-stone towards a numerical ice tank and provides insight into the mechanical behavior of model-scale ice. Therefore, systematic ice property tests were conducted with the model-scale ice of Aalto University to define the material behavior. The model-scale ice is fine grained (FG) and doped with ethanol to artificially weaken the material. The experiments investigate the behavior until failure in tension, compression and bending. Furthermore, the elastic modulus is determined by ice sheet deflection experiments and the grain-size is measured. The stress plane that is investigated is orthogonal to the vertical (thickness) coordinate and is the same as the one in which stresses occur when ships interact with ice. On the basis of the experiments, the mechanics and the constitution of the model-scale ice are investigated to define a suitable material model and its parameters. It was found that a damage based elasto-plastic material model represents the behavior of the Aalto model-scale ice well. The numerical model accounts explicitly for flaws in the model-scale ice, comprised of voids filled with liquid and air, which are randomly distributed. It is found that the random distribution of flaws enables the reproduction of the variation in experimentally observed failure patterns and affects the response forces. Furthermore, the cantilever beam bending experiments and their simulation reveal that the gradual change of ice properties over thickness has to be modeled to represent the experimentally measured axial stiffness and flexural stiffness in the same model. Ultimately, the model-scale ice is demonstrated to be a functionally graded material which is capable of representing tensile, compressive and flexural failure modes.Additionally, the development of the numerical model of the Aalto model-scale ice provides a deeper insight into its mechanical deformation processes. The material behavior that is found reveals that Cauchy similitude in scaling cannot be applied, because the model-scale ice of Aalto University is on micro scale not a purely elastic material. Consequently, model-scale ice consumes more energy prior to bending failure than a material complying Cauchy similitude.en
dc.format.extent120 + app. 50
dc.identifier.isbn978-952-60-6823-7 (electronic)
dc.identifier.isbn978-952-60-6822-0 (printed)
dc.identifier.issn1799-4942 (electronic)
dc.identifier.issn1799-4934 (printed)
dc.identifier.issn1799-4934 (ISSN-L)
dc.opnTaylor, Rocky, Prof., Memorial University, Canada
dc.opnJosefson, Lennart, Prof., Chalmers University of Technology, Sweden
dc.publisherAalto Universityen
dc.relation.haspart[Publication 1]: Rüdiger U. Franz von Bock und Polach, Sören Ehlers and Pentti Kujala. Model-scale ice - Part A Experiments. Cold Regions Science and Technology, Volume 94, Pages 74-81, October 2013. DOI: 10.1016/j.coldregions.2013.07.001
dc.relation.haspart[Publication 2]: Rüdiger U. Franz von Bock und Polach and Sören Ehlers. Model-scale ice - Part B Numerical Model. Cold Regions Science and Technology, Volume 94, Pages 53-60, October 2013. DOI: 10.1016/j.coldregions.2013.06.009
dc.relation.haspart[Publication 3]: Rüdiger U. Franz von Bock und Polach. Numerical analysis of the flexural strength of model-scale ice. Cold Regions Science and Technology, Volume 118, Pages 91-104, June 2015. DOI: 10.1016/j.coldregions.2015.06.003
dc.relation.haspart[Publication 4]: Rüdiger U. Franz von Bock und Polach, Sören Ehlers. On the scalability of model scale ice experiments. Journal of Offshore Mechanics and Arctic Engineering, Volume 137, Issue 5, Pages 1-11, October 2015. DOI: 10.1115/1.4031114
dc.relation.ispartofseriesAalto University publication series DOCTORAL DISSERTATIONSen
dc.revTaylor, Rocky, Prof., Memorial University, Canada
dc.revMcKenna, Richard, Dr., R.F. McKenna Associates, Canada
dc.revEttema, Robert, Prof., Colorado State University, United States of America
dc.subject.keywordmodel iceen
dc.subject.keywordnumerical modelen
dc.subject.keywordbending strengthen
dc.subject.otherMarine engineeringen
dc.titleThe mechanical behavior of model-scale ice: experiments, numerical modeling and scalabilityen
dc.typeG5 Artikkeliväitöskirjafi
dc.type.ontasotDoctoral dissertation (article-based)en
dc.type.ontasotVäitöskirja (artikkeli)fi
Original bundle
Now showing 1 - 2 of 2
No Thumbnail Available
7.32 MB
Adobe Portable Document Format
No Thumbnail Available
117.14 KB
Adobe Portable Document Format