Physically principled reflection models applied to filtered camera imaging inversions in metal walled fusion machines
No Thumbnail Available
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2019-04-01
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
12
Series
Review of Scientific Instruments, Volume 90, issue 4, pp. 1-12
Abstract
Ray-tracing techniques are applied to filtered divertor imaging, a diagnostic that has long suffered from artifacts due to the polluting effect of reflected light in metal walled fusion machines. Physically realistic surface reflections were modeled using a Cook-Torrance micro-facet bi-directional reflection distribution function applied to a high resolution mesh of the vessel geometry. In the absence of gonioreflectometer measurements, a technique was developed to fit the free parameters of the Cook-Torrance model against images of the JET in-vessel light sources. By coupling this model with high fidelity plasma fluid simulations, photo-realistic renderings of a number of tokamak plasma emission scenarios were generated. Finally, a sensitivity matrix describing the optical coupling of a JET divertor camera and the emission profile of the plasma was obtained, including full reflection effects. These matrices are used to perform inversions on measured data and shown to reduce the level of artifacts in inverted emission profiles.Description
| openaire: EC/H2020/633053/EU//EUROfusion
Keywords
Other note
Citation
Carr, M, Meakins, A, Silburn, S A, Karhunen, J, Bernert, M, Bowman, C, Callarelli, A, Carvalho, P, Giroud, C, Harrison, J R, Henderson, S S, Huber, A, Lipschultz, B, Lunt, T, Moulton, D & Reimold, F 2019, ' Physically principled reflection models applied to filtered camera imaging inversions in metal walled fusion machines ', Review of Scientific Instruments, vol. 90, no. 4, 043504, pp. 1-12 . https://doi.org/10.1063/1.5092781