Determining strength class of laminated log

dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.advisorFonselius, Mikael
dc.contributor.authorLaatikainen, Jesse
dc.contributor.departmentPuunjalostustekniikan laitosfi
dc.contributor.schoolKemian tekniikan korkeakoulufi
dc.contributor.schoolSchool of Chemical Engineeringen
dc.contributor.supervisorKairi, Matti
dc.date.accessioned2020-12-28T10:13:55Z
dc.date.available2020-12-28T10:13:55Z
dc.date.issued2012
dc.description.abstractIn this study, the strength class of laminated log was examined. The aim was to determine the strength class that could be linked to standard SFS 5973. The target was set to strength class C24. The project was conducted with the cooperation of log house manufacturers, which ordered the study and provided the logs. Measurements of bending strength and modulus of elasticity were performed at the Aalto University in the Department of Applied Mechanics in Otaniemi, Espoo. In addition moisture content and other values of wood were measured. Targets were not met due to the weak finger joints, which reduced values of bending strength. No reduction in MOE. Three pieces failed to achieve the strength 24 N/mm<sup>2</sup>. Testing involved some laminated logs with defects and none of them failed to reach the requirements. If the finger joints are improved to work at sufficient level the laminated logs have a good possibility to meet the requirements of strength class C24. An additional method of increasing strength properties is to improve the sorting.en
dc.description.abstractTyössä tutkittiin lamellihirren taivutuslujuutta. Tavoitteena oli määrittää lamellihirsien lujuus. joka olisi yhdistettävissä standardin SFS 5973 asetuksiin. Tavoitteeksi lujuudelle asetettiin lujuusluokka C24. Tutkimukset tehtiin hirsitalovalmistajien tilauksesta. jotka toimittivat testattavat hirret. Mittaukset suoritettiin Aalto-yliopistolla Sovelletun mekaniikan laitoksella Espoon Otaniemessä. Taivutuslujuuden lisäksi mitattiin myös kimmokerroin ja muita hirsien arvoja. Tavoitteista jäätiin johtuen heikoista sormijatkoksista. jotka heikensivät taivutuslujuutta. Kimmokerroin ei heikentynyt. Kolme kappaletta oli lujuudeltaan alle 24 N/mm<sup>2</sup>. Vertailuun otettiin myös ennakkoa ajatellen viallisempia kappaleita verrokeiksi ja näissä kappaleissa ei jääty alle 24 N/mm<sup>2</sup> taivutuslujuuden. Mikäli sormijatkokset saadaan toimimaan riittävällä tasolla, on lamellihirsillä hyvät edellytykset nykyisellä lajittelullaan päästä tavoitelujuuteen C24. Lujuutta voidaan nostaa myös parantamalla lajittelua.fi
dc.format.extent62 s. + liitt. 5
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/100018
dc.identifier.urnURN:NBN:fi:aalto-2020122858849
dc.language.isofien
dc.programme.majorPuutekniikkafi
dc.programme.mcodePuu-28fi
dc.rights.accesslevelclosedAccess
dc.subject.keywordwooden
dc.subject.keywordpuufi
dc.subject.keywordlaminated logen
dc.subject.keywordlamellihirsifi
dc.subject.keywordbending strengthen
dc.subject.keywordtaivutuslujuusfi
dc.titleDetermining strength class of laminated logen
dc.titleLamellihirren lujuusluokan määrittäminenfi
dc.type.okmG2 Pro gradu, diplomityö
dc.type.ontasotMaster's thesisen
dc.type.ontasotPro gradu -tutkielmafi
dc.type.publicationmasterThesis
local.aalto.digiauthask
local.aalto.digifolderAalto_92266
local.aalto.idinssi44712
local.aalto.openaccessno

Files