Lamellihirren lujuusluokan määrittäminen
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
School of Chemical Engineering |
Master's thesis
Checking the digitized thesis and permission for publishing
Instructions for the author
Instructions for the author
Authors
Date
2012
Department
Major/Subject
Puutekniikka
Mcode
Puu-28
Degree programme
Language
fi
Pages
62 s. + liitt. 5
Series
Abstract
In this study, the strength class of laminated log was examined. The aim was to determine the strength class that could be linked to standard SFS 5973. The target was set to strength class C24. The project was conducted with the cooperation of log house manufacturers, which ordered the study and provided the logs. Measurements of bending strength and modulus of elasticity were performed at the Aalto University in the Department of Applied Mechanics in Otaniemi, Espoo. In addition moisture content and other values of wood were measured. Targets were not met due to the weak finger joints, which reduced values of bending strength. No reduction in MOE. Three pieces failed to achieve the strength 24 N/mm<sup>2</sup>. Testing involved some laminated logs with defects and none of them failed to reach the requirements. If the finger joints are improved to work at sufficient level the laminated logs have a good possibility to meet the requirements of strength class C24. An additional method of increasing strength properties is to improve the sorting.Työssä tutkittiin lamellihirren taivutuslujuutta. Tavoitteena oli määrittää lamellihirsien lujuus. joka olisi yhdistettävissä standardin SFS 5973 asetuksiin. Tavoitteeksi lujuudelle asetettiin lujuusluokka C24. Tutkimukset tehtiin hirsitalovalmistajien tilauksesta. jotka toimittivat testattavat hirret. Mittaukset suoritettiin Aalto-yliopistolla Sovelletun mekaniikan laitoksella Espoon Otaniemessä. Taivutuslujuuden lisäksi mitattiin myös kimmokerroin ja muita hirsien arvoja. Tavoitteista jäätiin johtuen heikoista sormijatkoksista. jotka heikensivät taivutuslujuutta. Kimmokerroin ei heikentynyt. Kolme kappaletta oli lujuudeltaan alle 24 N/mm<sup>2</sup>. Vertailuun otettiin myös ennakkoa ajatellen viallisempia kappaleita verrokeiksi ja näissä kappaleissa ei jääty alle 24 N/mm<sup>2</sup> taivutuslujuuden. Mikäli sormijatkokset saadaan toimimaan riittävällä tasolla, on lamellihirsillä hyvät edellytykset nykyisellä lajittelullaan päästä tavoitelujuuteen C24. Lujuutta voidaan nostaa myös parantamalla lajittelua.Description
Supervisor
Kairi, MattiThesis advisor
Fonselius, MikaelKeywords
wood, puu, laminated log, lamellihirsi, bending strength, taivutuslujuus