Controlling Base Transceiver Station Antenna Angles Based on Network Data
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
Sähkötekniikan korkeakoulu |
Master's thesis
Authors
Date
2020-10-19
Department
Major/Subject
Control, Robotics and Autonomous Systems
Mcode
ELEC3025
Degree programme
AEE - Master’s Programme in Automation and Electrical Engineering (TS2013)
Language
en
Pages
48
Series
Abstract
There is a demand for even faster and more efficient mobile network connections. One method to increase mobile network or RAN (Radio Access Network) performance is by optimizing the usage of BTS (Base Transceiver Station) antennas. The angle of the antenna is one of the factors that can be optimized to make the serving area of the network cell have the optimal orientation and area size. The purpose of this optimization is to reduce interference from other cells and to ensure that there are no gaps in the network coverage. The goal of this thesis is to analyze the feasibility and requirements for developing an automated system to control the antenna angles of a BTS. The thesis evaluates the available KPIs (Key Performance Indicator) from network data to be used in making the antenna angle change decisions with the automated control system. The thesis also discusses RIC (RAN Intelligent Controller) which is a software platform the system could run on. The research found development of the control system to be a complex task. The system would need to be able to adapt to different environments and to analyze various KPIs for the antenna angle change decisions. The most promising way to be able to develop the control software is to use machine learning methods and train the system with the KPI data.Mobiiliverkkojen nopeuden ja tehokkuuden kasvulle on jatkuva kysyntä. Yksi tapa kasvattaa mobiiliverkon tai RAN:n (Radio Access Network) suorituskykyä on optimoida tukiasemien antenneja. Antennin kulma on yksi tekijä, joka voidaan optimoida, jotta verkon solun palvelualueelle saataisiin optimaalinen orientaatio ja koko. Tämän optimoinnin tarkoituksena on vähentää häiriöitä toisilta soluilta ja varmistaa että verkon kattavuudessa ei ole aukkoja. Tämän diplomityön tavoitteena on analysoida tukiaseman antennikulmien automatisoidun ohjausjärjestelmän kehityksen toteutettavuutta ja vaatimuksia. Diplomityö arvioi verkkodatasta saatavilla olevia KPI (Key Performance Indicator) -mittareita, joita käytettäisiin antennikulmamuutospäätösten tekemiseen automatisoidulla ohjausjärjestelmällä. Diplomityö käsittelee myös RIC:iä (RAN Intelligent Controller), joka on ohjelmistoalusta, jonka päällä järjestelmää ajettaisiin. Tutkimus havaitsi ohjausjärjestelmän kehittämisen olevan monimutkainen tehtävä. Järjestelmän tulisi olla kykenevä sopeutumaan erilaisiin ympäristöihin ja analysoimaan erityyppisiä KPI-mittareita antennikulmamuutospäätösten tekoa varten. Todennäköisin tapa saada ohjausohjelmisto kehitettyä olisi käyttää koneoppimismenetelmiä ja opettaa järjestelmä KPI-mittaridatan avulla.Description
Supervisor
Charalambous, ThemistoklisThesis advisor
Tallgren, TapioKeywords
antenna, control, RAN, RIC, BTS