Feedback Control in an Actuated Acoustic Guitar Using Frequency Shifting

Loading...
Thumbnail Image

Access rights

openAccess

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Date

2019-06

Major/Subject

Mcode

Degree programme

Language

en

Pages

373–381

Series

Journal of the Audio Engineering Society, Volume 67, issue 6

Abstract

Recent research demonstrated that the classical guitar can be advantageously augmented using a pickup to drive an actuator mounted on the guitar’s back plate. This allows enrichment of the instrument’s timbral palette with audio effect processors in the loop. The feedback problem that results from such a setup is similar to what occurs in live music performance setups where the sound of a guitar is amplified using a loudspeaker. In the present case, measurements of the augmented guitar’s open-loop response demonstrate that instabilities are susceptible to occurring from the string’s modes and not from the guitar’s sound-box. In particular, the shape of the magnitude response suggests frequency shifting as a viable solution to string instability. Introduction of an upward frequency shift in the forward path is proposed as a means for stabilizing the closed-loop system. Experimental results demonstrate that the proposed solution leads to improved stability even for a modest frequency shift of 3 Hz. The achieved gain margin improvement, which is shown to be of at least 3 dB, then comes at the cost of a clearly perceptible amplitude modulation, which may be acceptable in conjunction with other audio effects chosen by the performer.

Description

Keywords

Other note

Citation

Thuillier, E, Lähdeoja, O & Välimäki, V 2019, ' Feedback Control in an Actuated Acoustic Guitar Using Frequency Shifting ', Journal of the Audio Engineering Society, vol. 67, no. 6, pp. 373–381 . https://doi.org/10.17743/jaes.2019.0013