Estimate of 3D power wall loads due to Neutral Beam Injection in EU DEMO ramp-up phase
Loading...
Access rights
openAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2019-01-01
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
5
188-192
188-192
Series
Nuclear Materials and Energy, Volume 18
Abstract
Heating and current drive systems such as high energy Neutral Beam Injection (NBI) are being considered for pulsed EU DEMO (“DEMO1”) pre-conceptual design. Their aim is to provide auxiliary power, not only during flat-top, but also during transient phases (i.e. plasma current ramp-up and ramp-down). In this work, NBI fast particle power loads on DEMO1 first wall, due to shine-through and orbit losses, are calculated for the diverted plasma ramp-up phase. Numerical simulations are performed using BBNBI and ASCOT Monte Carlo codes. The simulations have been done using a complete 3D wall geometry, and implementing the latest DEMO NBI design, which foresees NBI at 800 keV particle energy. Location and power density of NBI-related power loads at different ramp-up time steps are evaluated and compared with the maximum tolerable heat flux taken from ITER case. Since NBI shine-through losses (dominant during low density phases) depend mainly on the beam energy, plasma density and volume, DEMO has a more favourable situation than ITER, enlarging NBI operational window. Using ITER criteria, DEMO NBI at full energy and power could be switched on during ramp-up at <ne> ~ 1.3 × 1019 m-3. This increases the appeal of neutral beam injectors as auxiliary power systems for DEMO.Description
| openaire: EC/H2020/633053/EU//EUROfusion
Keywords
Other note
Citation
Vincenzi, P, Varje, J, Agostinetti, P, Artaud, J F, Bolzonella, T, Kurki-Suonio, T, Mattei, M, Sonato, P & Vallar, M 2019, ' Estimate of 3D power wall loads due to Neutral Beam Injection in EU DEMO ramp-up phase ', Nuclear Materials and Energy, vol. 18, pp. 188-192 . https://doi.org/10.1016/j.nme.2018.12.031