Influence of manganese oxide on the liquid-perovskite equilibrium in the CaO–SiO2–TiO2 system at 1400 °C in air
No Thumbnail Available
Access rights
openAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2021-04-15
Major/Subject
Mcode
Degree programme
Language
en
Pages
7
Series
Ceramics International
Abstract
In the Selective Crystallization and Phase Separation (SCPS) process, manganese oxide is used as an additive to promote the precipitation of perovskite. However, the influence of manganese oxide on the liquid domain of the perovskite primary phase field is still unclear. In the present work, the liquid-perovskite equilibrium with the addition of 0–15 wt% Mn3O4 was experimentally determined using a high-temperature isothermal equilibration-quenching technique, combined with X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (SEM-EDS). It was confirmed that manganese was mainly existed as Mn2+ and Mn3+ in the molten phase, whereas titanium existed as Ti4+. Within the composition range of the present study, the 1400 °C liquid compositions varying from 0 wt% to 15 wt% Mn3O4 overlapped significantly, mainly located at w (CaO)/w (SiO2) ratios between 0.9 and 1.1. The isotherms simulated by FactSage, as well as the data from the literature, generally agreed well with the present experimental results. The calculated 1400 °C isotherms at different Mn3O4 levels indicated that perovskite precipitation by manganese oxide was mainly promoted by increasing the Mn3O4 concentration to expand the primary phase field of perovskite toward both higher and lower TiO2 content areas.Description
Keywords
Equilibrium, Perovskite, Phase diagram, Recovery, Titania-bearing slag
Other note
Citation
Wan, X, Chen, M, Qiu, Y, Shi, J, Li, J, Liu, C, Taskinen, P & Jokilaakso, A 2021, ' Influence of manganese oxide on the liquid-perovskite equilibrium in the CaO–SiO 2 –TiO 2 system at 1400 °C in air ', Ceramics International, vol. 47, no. 8, pp. 11176-11182 . https://doi.org/10.1016/j.ceramint.2020.12.241