Utilizing Internet of Things in fire protection systems
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
Sähkötekniikan korkeakoulu |
Master's thesis
Ask about the availability of the thesis by sending email to the Aalto University Learning Centre oppimiskeskus@aalto.fi
Authors
Date
2017-05-22
Department
Major/Subject
Control, Robotics and Autonomous Systems
Mcode
ELEC3025
Degree programme
AEE - Master’s Programme in Automation and Electrical Engineering (TS2013)
Language
en
Pages
76 + 7
Series
Abstract
The Internet of Things (IoT) expands the Internet to cover and connect physical objects through the introduction of ICT devices. This allows the remote monitoring and actuation of objects and their environment. IoT is rapidly spreading over various industries due to its adaptability to almost any application. It provides numerous opportunities for adopters, but also introduces some risks and challenges. Same end results can be achieved through different implementations, each of which provide different opportunities and introduce different risks and challenges. The issue is determining the best implementation for any given application. IoT is still under extensive research. Consequently, industry standards and best practices are yet to be fully established. This introduces risk in adopting IoT in this relatively early stage. The risks must be weighed against the achievable benefits. This thesis provides a feasibility study for introducing IoT-concepts to a fire protection system by studying existing literature and analyzing the fire protection system under inspection. Due to existing proof-of-concept from other industries, the initial hypothesis is that a fire protection IoT system is feasible, so also a possible abstract architecture is considered and initial models are constructed. The architecture design follows a developed architectural reference model. The models are kept at a high abstraction level, as is suitable for a feasibility study. This allows for flexibility in the design of the system moving forward. This thesis provides a viable blueprint based on which a fire protection IoT system can be designed and implemented. Based on the results of literature and architecture analysis, the benefits of implementing a fire protection IoT system can be extensive. However, some risks are inherent to the field, especially in regards to security. Mitigating solutions exist, though, so the risks and challenges should not discourage the adoption of IoT-concepts into the fire protection industry.Esineiden Internet (engl. Internet of Things, IoT) laajentaa perinteisen Internetin kattamaan myös fyysisiä esineitä ja asioita yhdistämällä niihin tieto- ja viestintäteknologisia laitteita. Tämä mahdollistaa esineiden ja niiden ympäristön etäseurannan ja -käytön. IoT on levinnyt nopeasti monenlaisiin teollisuusaloihin sen kattavan sopeutuvuuden ansiosta. IoT luo monenlaisia mahdollisuuksia sen omaksujille, mutta tuo mukanaan myös erilaisia riskejä ja haasteita. Samat lopputulokset on savuutettavissa useilla eri toteutusmenetelmillä, joista jokainen luo erilaisia mahdollisuuksia ja altistaa järjestelmän erilaisille riskeille ja haasteille. Tehtävänä siis on määrittää, mikä toteutustapa parhaiten vastaa käyttötarkoituksen tarpeita. IoT on edelleen laajan tutkimuksen kohde, minkä seurauksena standardit ja parhaat toimintatavat ovat vielä osittain määrittämättä. Tämä aiheuttaa riskiä IoT:n aikaisille omaksujille. Riskejä pitää verrata saavutettaviin hyötyihin. Tämä työ on soveltuvuustutkimus IoT-käytäntöjen omaksumisesta palontorjuntajärjestelmään. Soveltuvuutta määritetään kirjallisuuden perusteella ja analysoimalla tutkinnan kohteena olevaa palontorjuntajärjestelmää. Koska IoT on jo todettu toimivaksi ratkaisuksi monilla teollisuudenaloilla, alkuhypoteesi on, että se on toimiva ratkaisu myös paloturvallisuusalalla. Tästä johtuen tässä työssä mietitään ja mallinnetaan myös mahdollista arkkitehtuuria palontorjunta-IoT-järjestelmälle. Arkkitehtuuriin perehdytään valmiin arikkitehtuuri-referenssimallin perusteella. Luodut arkkitehtuurimallit pidetään abstrakteina, jotta saadaan säilytettyä joustavuutta lopullisen järjestelmän suunnittelun ja toteutuksen kanssa. Tämä työ siis antaa mahdollisen pohjapiirustuksen, jonka pohjalta konkreettisen järjestelmän suunnittelun ja toteutuksen voi aloittaa. Kirjallisuuden ja arkkitehtuurin analysoinnin perusteella on todettavissa, että palontorjunta-IoT-järjestelmän toteutus voi tuoda monia hyötyjä. Riskit kuuluvat kuitenkin alaan, etenkin turvallisuuteen liittyvät. Riskeille on olemassa lieventäviä ratkaisuja, joten IoT-käytäntöjen omaksumista paloturvallisuusalalle ei pitäisi välttää niiden vuoksi.Description
Supervisor
Visala, ArtoThesis advisor
Helasuo, JarmoKeywords
IoT, internet of things, fire protection, IoT architecture