aalto1 untyped-item.component.html
Developing a production planning and control system for a hybrid MTS/MTO environment with outsourcing options through simulation modelling
Loading...
URL
Journal Title
Journal ISSN
Volume Title
School of Science |
Master's thesis
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
82
Series
Abstract
Hybrid MTS/MTO systems aim to combine the benefits of both make-to-stock and make-to-order systems to be able to offer customers high customization and short lead times. However, existing hybrid MTS/MTO systems work poorly in settings where the items are differentiated from the start of production and are ordered both as large project orders and small replenishment orders.
In this thesis I aim to develop a hybrid MTS/MTO system that fits a case where some of the items are differentiated from the start of production, while others are machined from generic components. The demand consists of large project orders where long lead times are acceptable, and small replenishment orders which need to be filled from stock. Additionally, in-house production is not enough to meet demand, so some of the demand needs to be met by ordering from suppliers. Standard sequential hybrid MTS/MTO systems can be applied for items made of generic components, but for differentiated components, I propose using a modified parallel hybrid MTS/MTO system, where the same items are both MTO and MTS, which allows delaying the prioritization decision between MTS and MTO to post-production. The research method applied is discrete event simulation. The case company provided the data that was used to model the production facility and estimate demand.
The main findings of this thesis are that the modified parallel hybrid MTS/MTO system is far superior to pure MTO and MTS systems in a setting where items are differentiated from start and demand comes both in large project orders and small replenishment orders. Additionally, small decreases in inventory levels and lead times are gained by moving the MTS/MTO prioritization decision to post-production. The modified parallel hybrid system achieves similar fill rate and backlog replenishment order lead times as a sequential system with smaller inventory levels, but does not require the existence of generic components in the production chain.
Hybrid MTS/MTO-system används för att kombinera fördelarna med make-to-stock och make-to-order för att kunna erbjuda kunder differentierade produkter och korta ledtider. Många hybrid MTS/MTO-system är dåligt anpassade till situationer där komponenterna är helt differentierade från början av produktionen och beställs både i stora projektbeställningar och mindre påfyllningsbeställningar.
I denna avhandling ämnar jag utveckla ett hybrid MTS/MTO-system som passar i en situation där en del av produkterna är helt differentierade från början av produktionen, medan en del bearbetas från generiska komponenter. Efterfrågan består av stora projektbeställningar, där långa ledtider är acceptabla, och mindre påfyllningsbeställningar, som måste fullgöras från lager. Dessutom är den egna produktionskapaciteten inte tillräcklig för att möta hela efterfrågan, så en del av produkterna måste köpas in från leverantörer. Sekventiella hybrid MTS/MTO-system kan användas för produkter som görs av generella komponenter, men för produkter som är differentierade genom hela produktionskedjan föreslår jag ett modifierat parallellt hybrid MTS/MTO-system, där samma produkter produceras både på beställning och till lager, vilket möjliggör att prioriteringsbeslutet mellan beställningar och påfyllningslagret skjuts upp till slutet av produktionen.
Som forskningsmetod använder jag Discrete Event Simulation (DES simulering). Simuleringsmodellen byggdes enligt caseföretagets anvisningar och den simulerade efterfrågan baserar sig på caseföretagets uppskattningar.
Avhandlingens huvudresultat är att det modifierade parallella hybrid MTS/MTO-systemet är överlägset make-to-stock och make-to-order-system i situationer där produkterna är helt differentierade från början av produktionen och efterfrågan består av stora projektbeställningar och mindre påfyllningsbeställningar.
Dessutom kan lagren minskas och ledtiderna förkortas litet genom att flytta MTS/MTO prioriteringsbeslutet till efter produktionen. Det modifierade parallella hybrid MTS/MTO -systemet uppnår samma fill rate och backlog ledtider som ett sekventiellt hybrid MTS/MTO-system med mindre lagernivåer, men förutsätter inte att det finns generiska komponenter i produktionskedjan.