Fracture toughness and crack propagation in anisotropic triangular lattices
Loading...
Access rights
openAccess
CC BY
CC BY
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
9
Series
European Journal of Mechanics A: Solids, Volume 116
Abstract
This study investigates the fracture toughness, critical energy release rate, and crack growth resistance (R-curve) of anisotropic triangular lattices. Anisotropy is introduced by tailoring the lattice microstructure through variations in the thickness ratio t̄ of struts, while maintaining a constant relative density. The mode I fracture response is analyzed using the finite element method, based on a boundary layer technique. The simulations demonstrate a non-monotonic dependence of the fracture toughness on t̄, with peak values occurring at distinct thickness ratios depending on the crack orientation relative to the lattice topology. The corresponding critical energy release rate exhibits the same non-monotonic trend, but with a distinct dependence on t̄. The crack propagation analysis reveals that anisotropy strongly affects both the crack growth resistance and the corresponding crack growth path. Specifically, when the initial crack line is perpendicular to the vertical struts, increasing t̄ enhances resistance, and the crack tends to propagate along the initial crack line. On the other hand, when the initial crack line is parallel to the vertical struts, increasing t̄ first leads to a reduction in both fracture toughness and crack growth resistance, accompanied by a transition from slanted propagation to penetration along the initial crack line. However, beyond a critical thickness ratio (t̄≈1.50), the penetration growth persists only up to a limited distance from the initial crack tip, after which crack propagation resumes along a slanted path. This variation in the crack propagation process significantly enhances the crack growth resistance. Altogether, the results provide key insights into the fracture response of anisotropic lattices, offering practical guidelines for designing architected materials with improved toughness and controlled crack propagation.Description
Publisher Copyright: © 2025
Other note
Citation
Omidi, M & Niiranen, J 2026, 'Fracture toughness and crack propagation in anisotropic triangular lattices', European Journal of Mechanics A: Solids, vol. 116, 105854. https://doi.org/10.1016/j.euromechsol.2025.105854