aalto1 untyped-item.component.html
Prediction of shear crack formation of lithium-ion batteries under rod indentation : Comparison of seven failure criteria
Loading...
Access rights
openAccess
acceptedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
19
Series
Engineering Fracture Mechanics, Volume 217
Abstract
One of the major catastrophic events in the accidents involving electric vehicles is the electric short circuit, leading to the thermal runaway, and possible fire and explosion. The short circuit is a result of the development of local or through-thickness fracture inside a cell. Fracture of the discrete layered structure of lithium-ion batteries is a complex problem involving six materials with completely different deformation and fracture properties. The homogenized model of the deformation of batteries has emerged as the best compromise between simplicity and accuracy, and therefore the well-established Deshpande–Fleck model of crushable foams is used in the present analysis to describe the deformation behavior. For the fracture description of battery cells, the authors follow the experience accumulated over the decades in predicting failure of metals and geomaterials. The constitutive description of these classes of materials gained in complexity, requiring elaborated experimental techniques for the determination of material parameters. However, the choice of possible tests for pouch or cylindrical cells is very limited, which hinders the complexity in fracture models. Those tests are typically in-plane and out-of-plane compression tests because it is almost impossible to subject an individual pouch battery to tensile or shear loading. Therefore, out of vast literature in the field of fracture, only the simplest models are considered. In this study, the seven simplest fracture models, involving only one or maximum two material constants, are coupled with the homogenized Deshpande–Fleck model to study the fracture behavior of pouch cells. Their performance is critically evaluated in terms of the capability of predicting the initiation and propagation of crack under mechanical transverse loading.
Description
Keywords
Other note
Citation
Lian, J, Wierzbicki, T, Zhu, J & Li, W 2019, 'Prediction of shear crack formation of lithium-ion batteries under rod indentation : Comparison of seven failure criteria', Engineering Fracture Mechanics, vol. 217, 106520. https://doi.org/10.1016/j.engfracmech.2019.106520