Performance in Distributed Automation Applications: Estimation and Improvement
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
Sähkötekniikan korkeakoulu |
Master's thesis
Ask about the availability of the thesis by sending email to the Aalto University Learning Centre oppimiskeskus@aalto.fi
Authors
Date
2017-08-28
Department
Major/Subject
Control, Robotics and Autonomous Systems
Mcode
ELEC3025
Degree programme
AEE - Master’s Programme in Automation and Electrical Engineering (TS2013)
Language
en
Pages
115 + 6
Series
Abstract
The aim of this Master’s Thesis is to survey and develop methods for performance estimation within distributed automation systems. Since performance in event-driven IEC 61499 based automation has not been researched comprehensively so far, the general role of performance in automation is investigated and existing methods for estimating end-to-end response times in distributed IEC 61499 applications are studied. The empirical research builds a holistic model for estimating worst-case end-to-end response times based on the findings of the literature review, refines the model and validates it with case studies on a real-world automation testbed. In the analysis of the proposed concept, the model is found to be valid producing estimates within 10 % of the experimentally measured response times. Finally, the Thesis is concluded with a discussion of the possibility to implement the proposed model and other sophisticated methods into a software aid that enables convenient estimation of response times in automation systems before their deployment.Tämän diplomityön tavoitteena on kartoittaa ja kehittää suorituskyvyn estimointimenetelmiä hajautetuille automaatiojärjestelmille. Syystä, että suorituskykyä ei ole tutkittu kattavasti tapahtumaohjatussa IEC 61499 -perustaisessa automaatiossa, työssä tarkastellaan suorituskyvyn yleistä roolia automaatiossa ja tutkitaan olemassa olevia estimointimenetelmiä ketjunpäiden välisille vasteajoille. Empiirisessä tutkimuksessa rakennetaan holistinen malli ketjunpäiden välisten pahintapausvasteaikojen estimointia varten kirjallisuuskatsauksen löydösten pohjalta, jalostetaan mallia ja osoitetaan sen kelvollisuus yksittäistutkimuksilla käyttäen hyödyksi tosielämän automaatiojärjestelmää. Analysoidessa ehdotettua konseptia huomataan, että malli on kelvollinen tuottaen estimaatteja 10 % tarkkuudella kokeellisesti mitattuihin vasteaikoihin nähden. Diplomityö päätetään pohdintaan, jossa käsitellään mahdollisuutta toteuttaa ohjelmistotyökalu ehdotetun mallin ja muiden kehittyneiden menetelmien pohjalta mahdollistaen vasteaikojen kätevän estimoinnin automaatiojärjestelmissä jo ennen niiden käyttöönottoa.Description
Supervisor
Vyatkin, ValeriyThesis advisor
Vyatkin, ValeriyKeywords
performace, response time, IEC 61499, distributed automation