Internal curing of concrete
Loading...
URL
Journal Title
Journal ISSN
Volume Title
Insinööritieteiden korkeakoulu |
Master's thesis
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
2015-05-18
Department
Major/Subject
Kiinteistönpitotalous ja -tekniikka
Mcode
IA3004
Degree programme
Rakenne- ja rakennustuotantotekniikan koulutusohjelma
Language
en
Pages
66+14
Series
Abstract
Internal curing was used already in the Roman times, for example the famous Pantheon building is done partly with internally cured concrete. The external curing of concrete such as fogging the surface only achieves the surface of the concrete, with internal curing the whole 3-dimensional microstructure of the concrete could be cured. The objective of this thesis was to study the impact of internal curing on compressive strength, tensile/flexural strength and drying shrinkage. The goal was also to determine which grain sizes lightweight aggregates will be the best in internal curing use. In this thesis the internal curing is done with lightweight aggregates. The calculated amount of normal weight aggregate is replaced with lightweight aggregate, which is prewetted in the water for 24h before it was added to the concrete mix. Before it was added to the mix, the surface moisture of it was removed. Prewetted lightweight aggregate released its internal water to the concrete mix which improved the hydration process. The used research methods include; literature review, definition of research program and experimental studies. The obtained tests results showed that the best grain size of lightweight aggregates for internal curing are 0-2 mm and 2-4 mm. The usage of these sizes enabled to produce concrete having similar mechanical properties to normal concretes but significantly reduced drying shrinkage.Tässä tutkimuksessa tarkastellaan betonin sisäistä jälkihoitoa. Betonin sisäinen jälkihoito on tuttu aihe jo Rooman valtakunnan ajoilta, jossa esimerkiksi kuuluisa Pantheonin temppeli on rakennettu kevytsoraa apuna käyttäen. Betonin ulkoinen jälkihoito kuten betonipinnan kastelu vaikuttaa vain tiettyyn syvyyteen asti betonissa, sisäisellä jälkihoidolla pystytän vaikuttamaan koko 3-ulotteiseen kappaleeseen. Tavoitteena tässä diplomityössä on tutkia sisäisen jälkihoidon vaikutusta betonin puristuslujuuteen, taivutuslujuuteen sekä kuivumiskutistumaan verrattuna normaalisti valmistetun betonin vastaaviin ominaisuuksiin. Tavoitteena on myös selvittää, miten kevytsoran eri raekoot toimivat sisäisenä jälkihoito-aineena. Tässä diplomityössä betonin sisäinen jälkihoito toteutetaan kevytsoran avulla. Määrätty osa normaalista runkoaineesta korvataan kevytsoralla, jota kostutetaan yksi vuorokausi ennen betonin raaka-aineiden yhdistämistä. Kevytsoran pinta kuivataan paperimenetelmällä kostutuksen jälkeen pintakuivaksi. Kevytsora luovuttaa betonin raaka-aineiden yhdistämisessä sen sisään jääneen veden ja näin ollen betonin hydraatioprosessi paranee. Tutkimusmenetelmänä tässä tutkimuksessa käytettiin kirjallisuuskatsausta sekä betonilaboratoriossa tehtyjä tutkimuksia. Yhteenvetona voidaan sanoa, että kevytsoran raekoot 0-2mm sekä 2-4mm toimivat parhaiten betonin sisäiseen jälkihoitoon. Näillä raekoilla saavutetaan lähes vastaavat mekaaniset ominaisuudet kuin pelkästään normaalilla kiviaineksella valmistetulla betonilla. Kuivumiskutistumisominaisuudet ovat paremmat kaikilla esikostutettua kevytsoraa sisältävillä betoneilla, joten sisäinen jälkihoito pienentää betonin kutistumista.Description
Supervisor
Cwirzen, AndrzejThesis advisor
Habermehl-Cwirzen, KarinKeywords
internal curing, curing, lightweight aggregate, shrinkage, compressive strength