Massaluetteloiden tuottaminen CAD-ohjelmista : sähkösuunnittelijan näkökulma
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
Master's thesis
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
2006
Major/Subject
Lighting technology
Valaistustekniikka
Valaistustekniikka
Mcode
S-118
Degree programme
Elektroniikan ja sähkötekniikan koulutusohjelma
Language
fi
Pages
54
Series
Abstract
Työn tavoitteena oli selvittää sähkösuunnittelijan CAD-ohjelmalla tekemän massalaskennan vaikutuksia suunnittelutyöhön. Työssä tutkittiin sähköalan massalaskentaa talonrakennushankkeissa. Massalaskenta on nykyään urakoitsijoiden tehtävänä, ja tarjouslaskentavaiheessa tehdään suuri määrä tuottamatonta työtä, kun kaikki tarjoajat laskevat erikseen suunnitelman massat. Tarjouslaskentavaiheen hyödyn lisäksi massaluetteloiden tuottamiselle suunnitteluvaiheessa on muitakin perusteluita. Luetteloita voidaan esimerkiksi käyttää sopimusasiakirjoina ja niitä voidaan hyödyntää rakennuksen huoltokirjaa tehtäessä. Työssä esitetään kolmitasoinen malli massaluetteloille, lähtien yksinkertaisesta pisteluettelosta ja päättyen kattavaan tuote- ja tarvikeluetteloon. Eritasoisille luetteloille esitetään tarkoituksenmukaisia käyttökohteita ja tavoitteeksi asetetaan, että luettelot täydentyisivät hankkeen aikana, jolloin rakennuksen valmistuessa luovutusdokumentteihin voitaisiin sisällyttää täydellinen luettelo käytetyistä sähkötarvikkeista. Alalla on useita vuosia puhuttu laskennan siirtämisestä suunnittelijoille, mutta esteenä on ollut ohjeiden ja työkalujen puute. Ohjeita on nyt alettu luoda, ja tämä työ luo perustaa ohjeiden kehittämiselle edelleen. Myös kehittyneimmät suunnitteluohjelmat ovat nyt sellaisia, että niillä voidaan tuottaa luotettavia ja käyttökelpoisia massaluetteloita. Alimman tason luettelon tuottaminen työskenneltäessä kehittyneimmillä työkaluilla lisää suunnittelijan työmäärää muutamalla prosentilla. Suunnittelijan on käytettävä suunnitteluohjelmaa oikein ja tiedettävä piirtäessään, mitä tietoja luetteloon halutaan. Työn tuloksena syntyi myös kehitysehdotuksia suunnittelun tehtäväluettelon ja suunnitteluohjelmistojen kehittämiseksi. Työn teettäjänä ja pääasiallisena rahoittajana toimi JP-Talotekniikka Oy.The aim of this thesis was to determine the impact to the electrical design work when quantity calculation is done by a designer using a CAD program. The thesis examines the quantity calculation in electrical field of the construction industry. Nowadays, electrical contractors complete quantity calculation before the construction tender is submitted. A considerable amount of non-profitable work is thus carried out in the bidding phase. There are also other arguments for the designer to complete quantity calculation besides just the advantages this offers in the bidding phase. For example, the bills of quantities can be used as parts of contracts and they can also be used in preparing a maintenance manual for the building. This thesis presents a three-level model for bills of quantities, beginning with a simple list of electrical points and ending with an all-inclusive list of electrical components and devices. Proper applications for these different lists are also outlined. Further information should progressively be added to the lists as the project progresses, thereby producing a complete list of all electrical components and devices by the time the construction is finished. It has often been proposed that designers should do the calculations, not the contractors, but one obstacle to this has been a lack of tools and guidelines. In past years new guidelines have been drafted, and this thesis provides a basis to continue improving them. Nowadays, the most sophisticated CAD programs are able to produce definitive and useful material lists. The production of the lowest-level list would increase the designer's workload by only few percent. Added to this, the benefit of the first-level bill of quantities calculated by a designer would save millions of euros per year in construction costs. The thesis also presents proposals for developing the planning worklist and CAD programs. The thesis was commissioned and partly financed by JP Building Engineering Ltd.Description
Supervisor
Halonen, Liisa; Prof.Thesis advisor
Taulu, Osmo; Insinööri, osastonjohtajaKeywords
CAD, bill of quantities, computation of quantities, electrical contracting, electrical design, quantity calculation, product model, CAD, massalaskenta, massaluettelo, määräluettelo, sähkösuunnittelu, sähköurakointi, tuotemalli