aalto1 untyped-item.component.html
Dissolution Test Protocol for Estimating Water Quality Changes in Minerals Processing Plants Operating With Closed Water Circulation
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
18
Series
Minerals, Volume 10, issue 8, pp. 1-18
Abstract
To save freshwater resources and comply with environmental regulations, minerals processing operations are transitioning to partially or fully closed water circulation. However, the accumulation of electrolytes and the addition of reagents lead to changes in water composition and may compromise flotation performance and plant maintenance. As a consequence, costly modifications are often required to cope with these challenges. Therefore, knowledge about water quality variation owing to closed water circulation and its potential effect on the flotation performance is crucial. The experimental methodology presented in this paper targeted three main objectives: (1) predicting the tendency of the accumulation of elements and compounds into the process water during comminution, flotation, and storage in tailings facilities; (2) establishing a relationship between laboratory results and plant historical water quality data; and (3) predicting the potential effect of recycling water on flotation performance. The results obtained with Boliden Kevitsa ore showed a good correlation between the water matrix of the actual process water on-site and that obtained in the ore dissolution tests done in the laboratory. The final water composition came close to the process water in terms of major elements and some of the minor elements. Additionally, the work presented in this paper demonstrated that a dissolution loop allowed us to predict the potential impact of the recycling water on the ore flotability. This methodology could serve as an aid for predicting water quality matrix variation and designing closed water circulation systems at existing and new plants.
Description
| openaire: EC/H2020/730480/EU//ITERAMS
Other note
Citation
Le, T M K, Schreithofer, N & Dahl, O 2020, 'Dissolution Test Protocol for Estimating Water Quality Changes in Minerals Processing Plants Operating With Closed Water Circulation', Minerals, vol. 10, no. 8, 653, pp. 1-18. https://doi.org/10.3390/min10080653