aalto1 untyped-item.component.html
Characterization of Emissions from a Desktop 3D Printer
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
Series
Journal of Industrial Ecology, Volume 21, pp. S94-S106
Abstract
3D printers are currently widely available and very popular among the general public. However, the use of these devices may pose health risks to users, attributable to air-quality issues arising from gaseous and particulate emissions in particular. We characterized emissions from a low-end 3D printer based on material extrusion, using the most common polymers: acrylonitrile-butadiene-styrene (ABS) and polylactic acid (PLA). Measurements were carried out in an emission chamber and a conventional room. Particle emission rates were obtained by direct measurement and modeling, whereas the influence of extrusion temperature was also evaluated. ABS was the material with the highest aerosol emission rate. The nanoparticle emission ranged from 3.7·108 to 1.4·109 particles per second (# s−1) in chamber measurements and from 2.0·109 to 4.0·109 # s−1in room measurements, when the recommended extruder temperature was used. Printing with PLA emitted nanoparticles at the rate of 1.0·107 # s−1 inside the chamber and negligible emissions in room experiments. Emission rates were observed to depend strongly on extruder temperature. The particles’ mean size ranged from 7.8 to 10.5 nanometers (nm). We also detected a significant emission rate of particles of 1 to 3 nm in size during all printing events. The amounts of volatile organic and other gaseous compounds were only traceable and are not expected to pose health risks. Our study suggests that measures preventing human exposure to high nanoparticle concentrations should be adopted when using low-end 3D printers.
Description
Other note
Citation
Mendes, L, Kangas, A, Kukko, K, Mølgaard, B, Säämänen, A, Kanerva, T, Flores Ituarte, I, Huhtiniemi, M, Stockmann-Juvala, H, Partanen, J, Hämeri, K, Eleftheriadis, K & Viitanen, A K 2017, 'Characterization of Emissions from a Desktop 3D Printer', Journal of Industrial Ecology, vol. 21, pp. S94-S106. https://doi.org/10.1111/jiec.12569