Assessment of downward draught in high-glazing facades in cold climates-Experimental and CFD study into draught control with a 21-type radiator

Loading...
Thumbnail Image

Access rights

openAccess
publishedVersion

URL

Journal Title

Journal ISSN

Volume Title

A4 Artikkeli konferenssijulkaisussa

Major/Subject

Mcode

Degree programme

Language

en

Pages

8

Series

E3S Web of Conferences, Volume 246

Abstract

This paper investigates the interaction of a radiator's thermal plume and downdraught of cold glazed surfaces. Draughts in working areas are one of the most common thermal comfort complaints in modern buildings. A typical solution for dealing with these draughts is positioning the heat emitters such as radiators or convectors under the windows. However, with thermally efficient envelopes, the internal loads compromise a relatively high fraction of the heating demand and the emitters are working under partial loads in modern buildings. This study comprises two parts: an experimental phase in the EN442 standardized test chamber with a 21-type radiator, and a CFD simulation phase, where the model is validated and applied under an expanded set of boundary conditions. The expanded simulation set results provide preliminary insight into sizing and design. More specifically, the thermal plume can be parametrised with a velocity and temperature value along with the room air and glazing temperatures for a broader analysis and assessment of the risk of draught.

Description

Publisher Copyright: © The Authors, published by EDP Sciences, 2021. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.

Keywords

Other note

Citation

Võsa, K V, Ferrantelli, A & Kurnitski, J 2021, 'Assessment of downward draught in high-glazing facades in cold climates-Experimental and CFD study into draught control with a 21-type radiator', E3S Web of Conferences, vol. 246, 02002. https://doi.org/10.1051/e3sconf/202124602002