Influence of Water Quality on Sulphide Ore Oxidation and Speciation of Sulphur Anions during Autogenous Milling
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
19
Series
Minerals, Volume 13, issue 2
Abstract
Earlier studies at the Kevitsa Cu-Ni concentrator plant have indicated that seasonal variations of the properties of the process water affect the oxidation of the surface of the minerals, and further, the pentlandite flotation performance. However, it is not clear whether the differences in flotation performance are solely due to changes in the mineral surface oxidation, and/or also due to surface oxidation-induced changes in the aqueous phase of the pulp. This paper investigates the effects of the mineral surface oxidation of Kevitsa Cu-Ni ore on the properties of the aqueous phase of the slurry. A systematic study was formulated to monitor the surface oxidation related changes in the mill circuit of the Kevitsa concentrator plant. The study was timed to coincide with a seasonally observed drop in the concentrator plant’s flotation performance, which happens during the summer months (June, July, and August). Both physicochemical parameters, as well as sulphur oxyanions in the plant process water, mill discharge, and hydrocyclone overflows were monitored. Also, the bubble size in selected rougher and cleaner cells was monitored. The results show that season-related changes in mineral surface oxidation cause clear differences in the aqueous phase chemistry of the mill circuit. The increased concentration of reduced sulphur species in the mill discharge is an indication of extensive oxidation of the ore during milling. Also, the bubble size of the flotation cells reacts to the observed seasonal change. The findings of the study confirm that the consequences expected, based on the theory of mineral surface oxidation, are observable downstream in the aqueous phase of the milling circuit. Based on these results, it is not yet possible to say whether the poor flotation performance is caused solely by the oxidation of the mineral surface or also by the properties of the aqueous phase of the slurry after milling. However, the results show that the plant needs both to find ways to limit oxidation rates in the summer, and to consider installing a more robust frother, capable of maintaining efficacy during the warm season. The findings of this study may help the plant to develop ways to enable a timely response to changes in the recycled process water quality, to prevent harmful impacts on pentlandite flotation. The former could be achieved by lowering the temperature of the process water and flotation air, whereas the latter could mean using a different frother.Description
The authors would like to acknowledge Nora Schreithofer and Thi Minh Khanh Le for their input in the experimental design. The authors further thank Boliden Kevitsa Mine for providing the samples and the Department of Bioproducts and Biosystems, Aalto University for supporting this study.
Other note
Citation
Musuku, B, Kasymova, D, Saari, E & Dahl, O 2023, 'Influence of Water Quality on Sulphide Ore Oxidation and Speciation of Sulphur Anions during Autogenous Milling', Minerals, vol. 13, no. 2, 277. https://doi.org/10.3390/min13020277