Flocculants in produced water

Thumbnail Image

Files

master_Okpala_Chukwubuike_2020.pdf (5.56 MB)

URL

Journal Title

Journal ISSN

Volume Title

Kemian tekniikan korkeakoulu | Master's thesis
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.

Authors

Date

2020-08-18

Department

Major/Subject

Polymer Technology

Mcode

Degree programme

Nordic Master in Polymer Technology (N5PolTech)

Language

en

Pages

78

Series

Abstract

Produced water as the major by-product of oil and gas explorations contains high amounts of oil that are not safe for disposal into aquatic environment. With the increasing need for oil and gas across the globe, one of the major problems encountered is developing effective measures to properly treat and meet the regulation for reuse or disposal of produced water. Flocculation is an essential process in the treatment of produced water and involves the addition of flocculants during treatments to enhance effective separation of oil drops from water. Flocculation is however affected by the molecular weight of the flocculants, pH and salinity of the water. This work studied the effects of these factors on aggregation of flocculants in water. Different concentrations of four flocculants of Polydiallyldimethylammonium chloride (PolyDADMAC) F100k, F200k, F350k and F500k having different molecular weights were prepared in varying pH and salt concentrations and tested. The aggregate size distribution, Polydispersity Index (PDI) and Zeta potential (ZP) were characterized with a zeta sizer. Adsorption to Silica surfaces using Quartz Crystal Microbalance with Dissipation (QCM-D) was also determined. It was found that the aggregate size distribution, PDI and ZP varied from one flocculant to another at different concentrations, indicating that the choice of flocculants for produced water treatment depends specifically on the water pH and salinity in addition to the flocculant’s molecular weight. More mass was adsorbed at higher salinities and pH values and also depended on the type and concentration of the flocculant.

Description

Supervisor

Seppälä, Jukka

Thesis advisor

Øye, Gisle
Dudek, Marcin

Keywords

flocculants, produced water, water treatment, enhanced oil recovery, zeta sizer, polyDADMAC

Other note

Citation

Permanent link to this item

https://urn.fi/URN:NBN:fi:aalto-202008234936

Collections

[dipl] Kemian tekniikan korkeakoulu / CHEM