Performance of Adiabatic Melting as a Method to Pursue the Lowest Possible Temperature in 3He and 3He – 4He Mixture at the 4He Crystallization Pressure

dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.authorRiekki, T. S.
dc.contributor.authorSebedash, A. P.
dc.contributor.authorTuoriniemi, J. T.
dc.contributor.departmentMicrokelvin investigations
dc.contributor.departmentRussian Academy of Sciences
dc.contributor.departmentDepartment of Applied Physicsen
dc.date.accessioned2021-03-22T07:13:57Z
dc.date.available2021-03-22T07:13:57Z
dc.date.issued2020-06
dc.description.abstractWe studied a novel cooling method, in which 3He and 4He are mixed at the 4He crystallization pressure at temperatures below 0.5mK. We describe the experimental setup in detail and present an analysis of its performance under varying isotope contents, temperatures, and operational modes. Further, we developed a computational model of the system, which was required to determine the lowest temperatures obtained, since our mechanical oscillator thermometers already became insensitive at the low end of the temperature range, extending down to (90±20)μK≈Tc(29±5) (Tc of pure 3He). We did not observe any indication of superfluidity of the 3He component in the isotope mixture. The performance of the setup was limited by the background heat leak of the order of 30pW at low melting rates, and by the heat leak caused by the flow of 4He in the superleak line at high melting rates up to 500μmol/s. The optimal mixing rate between 3He and 4He , with the heat leak taken into account, was found to be about 100.150μmol/s. We suggest improvements to the experimental design to reduce the ultimate achievable temperature further.en
dc.description.versionPeer revieweden
dc.format.extent38
dc.format.extent1230-1267
dc.format.mimetypeapplication/pdf
dc.identifier.citationRiekki , T S , Sebedash , A P & Tuoriniemi , J T 2020 , ' Performance of Adiabatic Melting as a Method to Pursue the Lowest Possible Temperature in 3 He and 3 He – 4 He Mixture at the 4 He Crystallization Pressure ' , Journal of Low Temperature Physics , vol. 199 , no. 5-6 , pp. 1230-1267 . https://doi.org/10.1007/s10909-020-02416-3en
dc.identifier.doi10.1007/s10909-020-02416-3
dc.identifier.issn0022-2291
dc.identifier.issn1573-7357
dc.identifier.otherPURE UUID: feff3546-dd14-4f82-bade-c91be25b8b97
dc.identifier.otherPURE ITEMURL: https://research.aalto.fi/en/publications/feff3546-dd14-4f82-bade-c91be25b8b97
dc.identifier.otherPURE LINK: http://www.scopus.com/inward/record.url?scp=85081883913&partnerID=8YFLogxK
dc.identifier.otherPURE FILEURL: https://research.aalto.fi/files/56834752/Riekki2020_Article_PerformanceOfAdiabaticMeltingA.pdf
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/103322
dc.identifier.urnURN:NBN:fi:aalto-202103222601
dc.language.isoenen
dc.publisherSPRINGER/PLENUM PUBLISHERS
dc.relation.ispartofseriesJournal of Low Temperature Physicsen
dc.relation.ispartofseriesVolume 199, issue 5-6en
dc.rightsopenAccessen
dc.subject.keywordAdiabatic melting
dc.subject.keywordHelium-3
dc.subject.keywordHelium-3–Helium-4 mixture
dc.subject.keywordHelium-4
dc.subject.keywordKapitza resistance
dc.titlePerformance of Adiabatic Melting as a Method to Pursue the Lowest Possible Temperature in 3He and 3He – 4He Mixture at the 4He Crystallization Pressureen
dc.typeA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessäfi
dc.type.versionpublishedVersion
Files