Cooperative messages to enhance the performance of L3 vehicles approaching roadworks

Thumbnail Image
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Degree programme
Introduction In the near future, automated vehicles will drive on public roads together with traditional vehicles. Even though almost the whole academia agrees on that statement, the possible interferences between the two different kinds of driver are still to be analyzed and the real impacts on the traffic flow to be under-stood. Objectives Aim of this paper is to study one of the most likely L3 automated system to be deployed on public roads in the short term: Highway Chauffeur. The analysis of this system is carried out on a roadwork scenario to assess the positive impacts arising from a joint implementation of the automated system and the C-ITS Use Case signaling the closure of a lane. In fact, the main contribution of this paper is the assessment of the possible benefits in travel times and driving regime arising from the joint implementation of the Highway Chauffeur system and of C-ITS messages, both for the vehicles equipped with both technologies and for the surrounding traffic. Methods The assessment is achieved through traffic simulations carried out with the VISSIM software and a Python script developed by the authors. The overall process is described and the obtained results are provided, commented and compared to define the implementation of the C-ITS Use Case that could maximize the benefits of L3 driving. Results These results showed how triggering the take-over maneuver in ad-vance fosters the bottleneck efficiency (the same speed values reached between 80 and 100% Market Penetration for around 700 m range of the C-ITS message are reached at 50% Market Penetration with a 1500 m range). Besides, an in-creased speed up to 30 km/h at the bottleneck is recorded, depending on the mar-ket penetration and the message range. Finally, the delay upstream the roadworks entrance is reduced by 6% and arises at around 700 m, without the need to deploy the message up to 1500 m. Conclusions The paper investigates the impacts of take-over maneuvers and of automated driving while considering different operational parameters such as the message range. The results suggest all the potentialities of the Use Case while providing interesting figures that frame the trends related to the different imple-mentations. Finally, the tool developed to carry out the presented analysis is re-ported and made available so that hopefully the Use Case may be explored further and a precise impact assessment may be carried out with different prototypes of AVs and on different infrastructures.
highway chauffeur, L3 driving, C-roads Italy, C-ITS, roadworks warning, micro-simulation, COM-interface, automated driving, take-over
Other note
Agriesti, S, Ponti, M, Marchionni, G & Gandini, P 2021, ' Cooperative messages to enhance the performance of L3 vehicles approaching roadworks ', EUROPEAN TRANSPORT RESEARCH REVIEW, vol. 13, no. 1, 1 .