Study on applicability of end corrections of extended inlet and outlet of expansion chamber hydraulic noise suppressor
Loading...
Access rights
openAccess
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal
View/Open full text file from the Research portal
Other link related to publication
View publication in the Research portal
View/Open full text file from the Research portal
Other link related to publication
Author
Date
2019-11-15
Major/Subject
Mcode
Degree programme
Language
en
Pages
8
2000-2007
2000-2007
Series
JOURNAL OF VIBROENGINEERING, Volume 21, issue 7
Abstract
At present, a study on the end corrections of extended inlets and outlets of expansion chamber gas mufflers is relatively mature. However, such a research for an expansion chamber hydraulic suppressor has not been made yet. A coaxial and a non-coaxial expansion chamber configurations were introduced into hydraulic systems in this paper, and one-dimensional (1D) analytical approach was used to construct mathematical models of these structures and to verify it by experiments. After that, combined with the finite element method (FEM), researches on whether end corrections of the structures are applicable or not were studied.Description
Keywords
End correction, Expansion chamber, Extended inlet, Extended outlet, Hydraulic noise suppressor
Other note
Citation
Yang , F , Pietola , M & Deng , B 2019 , ' Study on applicability of end corrections of extended inlet and outlet of expansion chamber hydraulic noise suppressor ' , Journal of vibroengineering , vol. 21 , no. 7 , pp. 2000-2007 . https://doi.org/10.21595/jve.2019.19923
