aalto1 untyped-item.component.html
The optimum electrolyte parameters in the application of high current density silver electrorefining
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
14
Series
Metals, Volume 10, issue 12, pp. 1-13
Abstract
Increasing silver production rate has been a challenge for the existing refining facilities. The application of high current density (HCD) as one of the possible solutions to increase the process throughput is also expected to reduce both energy consumption and process inventory. From the recently-developed models of silver electrorefining, this study simulated the optimum electrolyte parameters to optimize the specific energy consumption (SEC) and the silver inventory in the electrolyte for an HCD application. It was found that by using [Cu2+] in electrolyte, both objectives can be achieved. The suggested optimum composition range from this study was [Ag+] 100–150 g/dm3, [HNO3] 5 g/dm3, and [Cu2+] 50–75 g/dm3. HCD application (1000 A/m2) in these electrolyte conditions result in cell voltage of 2.7–3.2 V and SEC of 0.60–1.01 kWh/kg, with silver inventory in electrolyte of 26–39 kg silver for 100 kg per day basis. The corresponding figures for the conventional process were 1.5–2.8 V, 0.44–0.76 kWh/kg, and 15.54–194.25 kg, in respective order. These results show that, while HCD increases SEC by app. 30%, the improvement provides a significant smaller footprint as a result of a more compact of process. Thus, applying HCD in silver electrorefining offers the best solution in increasing production capacity and process efficiency.
Description
Other note
Citation
Aji, A T, Aromaa, J & Lundström, M 2020, 'The optimum electrolyte parameters in the application of high current density silver electrorefining', Metals, vol. 10, no. 12, 1596, pp. 1-13. https://doi.org/10.3390/met10121596