Heavy Alkali Treatment of Cu(In,Ga)Se2 Solar Cells: Surface versus Bulk Effects
No Thumbnail Available
Access rights
openAccess
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal
View/Open full text file from the Research portal
Other link related to publication
View publication in the Research portal
View/Open full text file from the Research portal
Other link related to publication
Date
2020-02
Department
Department of Applied Physics
Major/Subject
Mcode
Degree programme
Language
en
Pages
15
1-15
1-15
Series
Advanced Energy Materials
Abstract
Chalcopyrite solar cells achieve efficiencies above 23%. The latest improvements are due to post-deposition treatments (PDT) with heavy alkalis. This study provides a comprehensive description of the effect of PDT on the chemical and electronic structure of surface and bulk of Cu(In,Ga)Se2. Chemical changes at the surface appear similar, independent of absorber or alkali. However, the effect on the surface electronic structure differs with absorber or type of treatment, although the improvement of the solar cell efficiency is the same. Thus, changes at the surface cannot be the only effect of the PDT treatment. The main effect of PDT with heavy alkalis concerns bulk recombination. The reduction in bulk recombination goes along with a reduced density of electronic tail states. Improvements in open-circuit voltage appear together with reduced band bending at grain boundaries. Heavy alkalis accumulate at grain boundaries and are not detected in the grains. This behavior is understood by the energetics of the formation of single-phase Cu-alkali compounds. Thus, the efficiency improvement with heavy alkali PDT can be attributed to reduced band bending at grain boundaries, which reduces tail states and nonradiative recombination and is caused by accumulation of heavy alkalis at grain boundaries.Description
| openaire: EC/H2020/641004/EU//Sharc25
Keywords
alkali treatment, bulk, chalcopyrite solar cells, grain boundaries, recombination, surface
Other note
Citation
Siebentritt, S, Avancini, E, Bär, M, Bombsch, J, Bourgeois, E, Buecheler, S, Carron, R, Castro, C, Duguay, S, Félix, R, Handick, E, Hariskos, D, Havu, V, Jackson, P, Komsa, H P, Kunze, T, Malitckaya, M, Menozzi, R, Nesladek, M, Nicoara, N, Puska, M, Raghuwanshi, M, Pareige, P, Sadewasser, S, Sozzi, G, Tiwari, A N, Ueda, S, Vilalta-Clemente, A, Weiss, T P, Werner, F, Wilks, R G, Witte, W & Wolter, M H 2020, ' Heavy Alkali Treatment of Cu(In,Ga)Se 2 Solar Cells : Surface versus Bulk Effects ', Advanced Energy Materials, vol. 10, no. 8, 1903752, pp. 1-15 . https://doi.org/10.1002/aenm.201903752
