Observer-Based State-Space Current Control for a Three-Phase Grid-Connected Converter Equipped With an LCL Filter

Loading...
Thumbnail Image
Access rights
© 2014 Institute of Electrical & Electronics Engineers (IEEE). Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other work.
Journal Title
Journal ISSN
Volume Title
School of Electrical Engineering | A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Date
2014
Major/Subject
Mcode
Degree programme
Language
en
Pages
2700-2709
Series
IEEE Transactions on Industry Applications, Volume 50, Issue 4
Abstract
This paper presents a state-space current control method for active damping of the resonance frequency of the LCL filter and setting the dominant dynamics of the converter current through direct pole placement. A state observer is used, whereupon additional sensors are not needed in comparison with the conventional L filter design. The relationship between the system delay and instability caused by the resonance phenomenon is considered. Nyquist diagrams are used to examine the parameter sensitivity of the proposed method. The method is validated with simulations and experiments.
Description
Keywords
delay, LCL filter, Nyqvist diagram, parameter sensitivity, phase-lead compensator, state-space current control
Other note
Citation
Kukkola, Jarno & Hinkkanen, Marko. 2014. Observer-Based State-Space Current Control for a Three-Phase Grid-Connected Converter Equipped With an LCL Filter. IEEE Transactions on Industry Applications. Volume 50, Issue 4. 2700-2709. ISSN 0093-9994 (printed). DOI: 10.1109/tia.2013.2295461.