Cyclic fatigue resistance of silica based refractories for Coke ovens

dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.advisorAndreev, Kirill
dc.contributor.authorTadaion, Vahid
dc.contributor.schoolKemian tekniikan korkeakoulufi
dc.contributor.supervisorSerna, Rodrigo
dc.date.accessioned2016-09-22T08:55:52Z
dc.date.available2016-09-22T08:55:52Z
dc.date.issued2016-09-13
dc.description.abstractThe refractory linings of Coke oven walls at Coke Plant 2 of TATA Steel IJmuiden are in the process of replacement. The campaign life of the new ovens is expected to exceed 30 years. During the service the linings are exposed to cyclic thermo-mechanical loads. Over time the loads cause cracking and degradation of the linings. This study investigates the resistance of two types of silica based refractories to cyclic fatigue failure for material selection purposes. The typical methods approached in previous studies to address fatigue failure in materials are reviewed and their applicability to fulfill the aims of this study is discussed. A strain-controlled test procedure is developed for the existing testing equipment in three point bending and compression setups. Both of the materials are found susceptible to cyclic fatigue failure in the strain-controlled mode. Moreover, the stress-strain envelopes in monotonic and cyclic loading tests are found to be different. Fractographic analysis and other complementary techniques revealed the difference is due to the gradual development of micro-damage during the loading cycles. The formation of micro-damage is found responsible for the less brittle failure occurred in cyclic tests. The fused silica material is found to be less vulnerable to fatigue failure than the crystalline silica brick. The microstructural features of the fused silica material account for its reduced brittleness behavior.en
dc.format.extent77 + 7
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/22160
dc.identifier.urnURN:NBN:fi:aalto-201609224169
dc.language.isoenen
dc.locationPKfi
dc.programmeErasmus Mundus Minerals and Environmental Programmefi
dc.programme.majorEuropean Mineral Engineering Coursefi
dc.programme.mcodeCHEM3006fi
dc.rights.accesslevelclosedAccess
dc.subject.keywordsilica refractoriesen
dc.subject.keywordCoke oven liningen
dc.subject.keywordthermo-mechanical loadsen
dc.subject.keywordcyclic fatigueen
dc.subject.keywordfatigue failure mechanismen
dc.titleCyclic fatigue resistance of silica based refractories for Coke ovensen
dc.typeG2 Pro gradu, diplomityöfi
dc.type.okmG2 Pro gradu, diplomityö
dc.type.ontasotMaster's thesisen
dc.type.ontasotDiplomityöfi
dc.type.publicationmasterThesis
local.aalto.idinssi54403
local.aalto.openaccessno
Files