Centralized CAD-data management via platforms
Loading...
URL
Journal Title
Journal ISSN
Volume Title
Insinööritieteiden korkeakoulu |
Master's thesis
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
2021-05-17
Department
Major/Subject
Mcode
Degree programme
Master's Programme in Mechanical Engineering (MEC)
Language
en
Pages
55
Series
Abstract
Computer Aided Design (CAD) is a method to create 2D- or 3D-designs with the assistance of computers. CAD-data has become one of the key factors in modern era industry due to its higher efficiency compared to traditional drawing on paper. This thesis describes an optional way to control CAD-design data for companies which don’t use Product Data Management -software (PDM) for their CAD-data management. The absence of PDM can cause challenges with modular products if they use a product platform as the core of their design. The changes in items need to get updated into the platforms to have the products designed according to newest innovations. Central theory of product platforms and modularity is discussed to explain the relevant concepts related to the topic. Different ways of keeping the platform designs updated are tested and evaluated. Multiple different ways of creating and modifying the designs of items (from single parts to assemblies) in terms of storing the data are discussed. Various functionalities of PTC’s Creo are described to create a basis for the CAD-data management on the computers’ operating system. Creo is used for the case study since it’s being used as the CAD-software by the case study’s company. Possible risks relating to design data from both internal and external side are considered. A chosen method for controlling the design data is represented alongside with a possible data repository structure. Its capabilities and limitations are analyzed. The method is found to be applicable and help in possible implementation of a PDM-software. Possible future research relating to increased automation of the chosen method is suggested.Tietokoneavusteinen suunnittelu (CAD) on metodi 2D- tai 3D-mallien luomiseksi tietokoneiden avulla. CAD-datasta on tullut yksi nykyajan teollisuuden avaintekijöistä, koska se on tehokkaampaa perinteikkääseen paperille piirtämiseen verrattuna. Tässä diplomityössä kuvaillaan vaihtoehtoinen tapa hallita CAD-dataa yrityksille, jotka eivät käytä tuotetiedonhallinnan työkaluja (PDM). PDM:n käyttämättömyys voi aiheuttaa haasteita modulaaristen tuotteiden kanssa, jos niiden design pohjautuu yhteisiin tuotealustoihin. Yrityksen käyttämien yksittäisten esineiden designmuutosten tulee päivittyä tuotealustoihin, jotta yrityksen tuotteissa sovelletaan uusimpia innovaatioita. Tuotealustojen ja modulaarisuuden keskeisiä konsepteja liittyen tämän työn aiheeseen esitellään. Erilaisia keinoja pitää tuotealustojen design päivitettynä testataan ja arvioidaan. Useista erilaisista keinoista esineiden luomiselle ja muokkaamiselle (yksittäisistä osista kokoonpanoihin) tiedonhallinnan osalta keskustellaan. PTC:n Creon erinäisiä toiminnallisuuksia esitellään pohjaksi CAD-datan hallinnalle tietokoneiden käyttöjärjestelmän kautta, koska tutkimuksen kohteena oleva yritys käyttää Creota CAD-ohjelmistonaan. Mahdollisia yrityksen sisäisiä ja ulkoisia riskejä CAD-dataan liittyen käsitellään. Valittu työskentelytapa tuotetiedon hallintaan ilman PDM-järjestelmää esitellään yhdessä mahdollisen tiedostosijaintirakenteen kanssa. Sen kyvykkyyttä ja rajoitteita analysoidaan. Valittu työskentelytapa havaitaan käyttökelpoiseksi ja myös avustavaksi mahdollisen PDM-järjestelmän käyttöönottamisessa myöhemmin. Mahdollista tutkimusta liittyen valitun työskentelytavan laajempaan automatisointiin ehdotetaan.Description
Supervisor
Otto, KevinThesis advisor
Vorselman, PieterNiknammoghadam, Amir
Keywords
computer aided design, mass customization, modularity, operating system, product platform, product data management