Identifying the primary reactions and products of fast pyrolysis of alkali lignin

Loading...
Thumbnail Image

Access rights

openAccess
publishedVersion

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Major/Subject

Mcode

Degree programme

Language

en

Pages

9

Series

Journal of Analytical and Applied Pyrolysis, Volume 151

Abstract

This study focused on the effect of temperature and residence time on the primary thermal decomposition reactions during a fast pyrolysis of softwood alkali lignin. The use of Py-GC/MS/FID (Micropyrolyser-Gas Chromatography/Mass Spectrometry/Flame Ionization Detector) allowed for rapid heating of the sample and detailed identification and quantification of the pyrolysis products at a temperature range of 400–600 °C, with residence times from 0.5–5 s. The identified primary pyrolysis products were mainly volatile guaiacyl-type compounds. There was a general increase in yield for the majority of the volatile compounds with increased temperature and time. The cleavage of the lignin polymer to linear carbonyl (acetaldehyde) and guaiacyl-type aromatic compounds increased with temperature, while that of catechol and cresol type was mainly favoured at 500 and 600 °C. Based on these results, a mechanistic pathway for the pyrolytic process was proposed, drawing a linkage from structural units of lignin to the formed primary products. In summary, our findings suggest that the primary decomposition reactions that occur under the fast pyrolysis conditions can be controlled by varying the process temperature and residence time, and deliver mechanistic insight into the product distribution from structurally complex lignin material.

Description

Other note

Citation

Supriyanto, Usino, D O, Ylitervo, P, Dou, J, Sipponen, M H & Richards, T 2020, 'Identifying the primary reactions and products of fast pyrolysis of alkali lignin', Journal of Analytical and Applied Pyrolysis, vol. 151, 104917. https://doi.org/10.1016/j.jaap.2020.104917