Seismocardiography: Practical implementation and feasibility

Loading...
Thumbnail Image

URL

Journal Title

Journal ISSN

Volume Title

School of Electrical Engineering | Doctoral thesis (article-based) | Defence date: 2014-10-17
Checking the digitized thesis and permission for publishing
Instructions for the author

Date

2014

Major/Subject

Mcode

Degree programme

Language

en

Pages

44 + app. 58

Series

Aalto University publication series DOCTORAL DISSERTATIONS, 145/2014

Abstract

Today, a rather comprehensive view of the state of the cardiovascular system can be obtained in the clinical environment. The already established methods, such as electrocardiography, phonocardiography, and impedance cardiography, are relatively inexpensive methods and produce information about the electrical phenomena, sound waves, and impedance variations produced by the function of the cardiovascular system. Cardiovascular magnetic resonance imaging, echocardiography, nuclear cardiology, and X-ray computed tomography, on the otherhand, are relatively expensive and labor-intensive methods that produce images of the cardiovascular system and provide information about the perfusion and metabolism of themyocardium and also the blood flow. Seismocardiography (SCG) is a newly revived inexpensive method where local vibrations due to cardiovascular function are detected non-invasively from the sternum. These vibrations provide information about the mechanical function of the cardiovascular system that can be used as an independent diagnostic cue or as a complement to the contemporary methods. Thusfar, SCG has been proposed to be a useful tool in ischemia detection. SCG is also proposed to function as a relatively simple method for assessing myocardial contractility. While the bulkiness of the sensors and limited computing capacity hindered the feasibility of SCG in the clinical environment, the advances in computing power and accelerometer technology have now enabled practical SCG implementations. In this thesis, the feasibility of SCG and the means to successfully implement a practical system for detection of SCG signals were studied. Two different SCG measurement systems were implemented and their performance was evaluated. The present implementations featured improved acceleration measurement sensitivity and a multimodal approach to the detection of SCG and auxiliary physiological signals. Also, the three-dimensional aspect of the SCG signals was more extensively utilized than in previous works. These enhancements improved SCG measurements and will increase the potential of SCG to be taken into clinical practice.

Sydän- ja verenkiertoelimistön tilasta saadaan kliinisissä olosuhteissa hyvin kattava kuva. Sähköisiä ilmiöitä, ääniaaltoja ja impedanssimuutoksia voidaan mitata vakiintuneilla menetelmillä kuten elektrokardiografialla, fonokardiografialla ja impendanssikardiografialla melko edullisesti. Sydämen magneettikuvauksella, ultraäänikardiografialla, isotooppikardiografialla ja tietokonetomografialla saadaan kuvia sydän- javerenkiertoelimistöstä sekä tietoa sydänlihaksen aineenvaihdunnasta ja perfuusiosta ja verenvirtauksesta. Nämä menetelmät ovat kuitenkin kalliita ja työvoimavaltaisia. Seismokardiografia (SKG) on äskettäin elpynyt edullinen mittausmenetelmä, jossa sydämen aiheuttamia paikallisia värähtelyjä mitataan kajoamattomasti rintalastalta. Nämä värähtelyt antavat sydän- ja verenkiertoelimistön mekaanisesta toiminnasta tietoa, jota voidaan käyttää täydentämään muilla menetelmillä tehtyä diagnoosia. Esimerkiksi iskemian havaitsemisessaja sydänlihaksen supistuvuuden arvioinnissa on saavutettu lupaavia tuloksia. Aiemmin toteutettujen SKG-järjestelmien anturit olivat kuitenkin suurikokoisia eikä laitteistoissa ollut riittävästi laskentatehoa. Nykyisin käytännöllisen SKG-laitteiston toteuttaminen on mahdollista. Tässä työssä tutkittiin SKG:n toteutuskelpoisuutta sekä tapoja, joilla käytännöllinen järjestelmä SKG-signaalien havaitsemiseen voidaan toteuttaa. Lisäksi tässä työssä toteutettiin kaksi erillistä mittausjärjestelmää sekä arvioitiin niiden suorituskykyä. Toteutetuissa mittausjärjestelmissä kiihtyvyysmittaus oli muita järjestelmiä herkempi, ja lisäksi järjestelmissä käytettiin monimodaalista lähestymistapaa SKG-signaalien ja muiden fysiologisten signaalien mittaamiseen. SKG-signaalin kolmiulotteisuus otettiin myös huomioon laajemmin kuin aiemmissa aihealueen julkaisuissa. Edellä mainitut kohennukset paransivat SKG-mittauksia, ja ne tulevat parantamaan SKG:n valmiutta kliinisiin sovelluksiin.

Description

Supervising professor

Sepponen, Raimo, Prof., Aalto University, Department of Electrical Engineering and Automation, Finland

Thesis advisor

Sepponen, Raimo, Prof., Aalto University, Department of Electrical Engineering and Automation, Finland

Keywords

seismocardiography, electrocardiography, accelerometer, cardiovascular, three-dimensional, seismokardiografia, elektrokardiografia, kiihtyvyysmittaus, sydän- ja verenkiertoelimistö, kolmiulotteinen

Other note

Parts

  • [Publication 1]: Paukkunen, M., Linnavuo, M., Kuutti, J., & Sepponen, R. (2015). Ubiquitous Health Monitoring Systems. In M. Khosrow-Pour (Ed.), Encyclopedia of Information Science and Technology, Third Edition (pp. 3468–3475). Hershey, PA.
    DOI: 10.4018/978-1-4666-5888-2.ch340 View at publisher
  • [Publication 2]: Paukkunen, M., & Linnavuo, M. (2014). Precordial Vibrations: Seismocardiography – Techniques and Applications. In M. Khosrow-Pour (Ed.), Contemporary Advancements in Information Technology Development in Dynamic Environments (pp. 201–220). Hershey, PA.
    DOI: 10.4018/978-1-4666-6252-0.ch011 View at publisher
  • [Publication 3]: Paukkunen, M., Linnavuo, M., & Sepponen, R. (2013). A Portable Measurement System for the Superior-Inferior Axis of the Seismocardiogram. Journal of Bioengineering & Biomedical Science, 3(1).
  • [Publication 4]: Paukkunen, M., Linnavuo, M., Haukilehto, H., & Sepponen, R. (2012). A System for Detection of Three-Dimensional Precordial Vibrations. International Journal of Measurement Technologies and Instrumentation Engineering (IJMTIE), 2(1), 52–66.
    DOI: 10.4018/ijmtie.2012010104 View at publisher

Citation