A large-eddy simulation study on the influence of diesel pilot spray quantity on methane-air flame initiation
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2019-05-30
Major/Subject
Mcode
Degree programme
Language
en
Pages
16
Series
Combustion and Flame, Volume 206, pp. 506-521
Abstract
The present study is a continuation of the previous work by Kahila et al. (2019), in which a dual-fuel (DF) ignition process was numerically investigated by modeling liquid diesel-surrogate injection into a lean methane-air mixture in engine relevant conditions. Earlier, the injection duration (tinj) of diesel-surrogate exceeded substantially the characteristic autoignition time scale. Here, such a pilot spray ignition problem is studied at a fixed mass flow rate but with a varying tinj. The focus is on understanding the influence of pilot quantity on spray dilution process and low- and high-temperature chemistry. In total, ten cases are computed with multiple diesel pilot quantities by utilizing a newly developed large-eddy simulation/finite-rate chemistry solver. The baseline spray setup corresponds to the Engine Combustion Network (ECN) Spray A configuration, enabling an extensive validation of the present numerical models and providing a reference case for the DF computations. Additionally, experimental results from a single-cylinder laboratory engine are provided to discuss the ignition characteristics in the context of a real application. The main results of the present study are: (1) reducing tinj introduces excessive dilution of the DF mixture, (2) dilution lowers the reactivity of the DF mixture, leading to delayed high-temperature ignition and slow overall methane consumption, (3) low enough pilot quantity (tinj < 0.3 ms) may lead to very long ignition delay times, (4) cumulative heat release is dominated by low/high-temperature chemistry at low/high tinj values, (5) analysis of the underlying chemistry manifold implies that the sensitivity of ignition chemistry on mixing is time-dependent and connected to the end of injection time, and 6) long ignition delay times at very low tinj values can be decreased by decreasing injection pressure.Description
Keywords
Dual-fuel, ECN, Ignition, LES, Pilot, Spray A
Other note
Citation
Kahila, H, Kaario, O, Ahmad, Z, Ghaderi Masouleh, M, Tekgül, B, Larmi, M & Vuorinen, V 2019, ' A large-eddy simulation study on the influence of diesel pilot spray quantity on methane-air flame initiation ', Combustion and Flame, vol. 206, pp. 506-521 . https://doi.org/10.1016/j.combustflame.2019.05.025