Impact of bimodal particle size distribution ratio of functional calcium carbonate filler on thermal and flowability properties of polyamide 12

Loading...
Thumbnail Image
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Date
2021-01-02
Major/Subject
Mcode
Degree programme
Language
en
Pages
13
1-13
Series
Applied Sciences (Switzerland), Volume 11, issue 2
Abstract
In previous investigations, it was shown that the melting, as well as crystallization behavior of polyamide 12, could be manipulated by adjusting the particle size distribution of calcium carbonate as a functional filler. It was demonstrated that the melt properties of this compound show a significant dependency on the filler volume-based particle size. As finer and narrower the calcium carbonate particles in the polymer matrix become, the less influence the filler has on the melting properties, influencing the melt flow less significantly than the same surface amount of broad size distribution coarse calcium carbonate filler particles. However, due to increased nucleation, the crystallization behavior on cooling showed a markedly more rapid onset in the case of fine sub-micrometer filler particle size. To control further and optimize the thermal response properties of a filling compound for improved properties in additive manufacturing processing through selective laser sintering, the possibility to combine precisely defined particle size distributions has been studied, thereby combining the benefits of each particle size range within the chosen material size distribution contributes to the matrix. The melt flow at 190◦ C, the melting speed, melting and crystallization point as well as crystallization time at 170◦ C were analyzed. The thermal and flow properties of a polyamide 12 matrix can potentially be optimized with a combination of a precise amount of coarse and fine calcium carbonate filler. The improvements were exemplified using a twin-screw extruder for compounding, indicating the potential for optimizing functionally filled polymer in additive manufacturing.
Description
Keywords
Additive manufacturing, Functional calcium carbonate, Polymer composites
Other note
Citation
Ippolito , F , Hübner , G , Claypole , T & Gane , P 2021 , ' Impact of bimodal particle size distribution ratio of functional calcium carbonate filler on thermal and flowability properties of polyamide 12 ' , Applied Sciences (Switzerland) , vol. 11 , no. 2 , 641 , pp. 1-13 . https://doi.org/10.3390/app11020641