Biomass derived synthesis gas clean-up and conditioning: utilization of experimental data in evaluation and optimization of a tar reformina unit
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
School of Chemical Engineering |
Master's thesis
Checking the digitized thesis and permission for publishing
Instructions for the author
Instructions for the author
Authors
Date
2011
Department
Major/Subject
Tehdassuunnittelu
Mcode
Kem-107
Degree programme
Language
en
Pages
ix + 76 s. + liitt. 4
Series
Abstract
One of the challenges in utilization of biomass in synthesis gas production is high tar content in the product gas. Tar components have to be either removed or eliminated to acceptable level. In this thesis the operation of an industrial size tar reforming unit is modelled for performance evaluation and optimization purposes. The modelled reformer is a two-staged and operated auto thermally. Synthesis gas to be purified originates from a bubbling fluidized bed gasifier operated with lignocellulosic biomass. An Excel calculation program was constructed and used for verification of reformer operation related assumptions and for validation of conclusions made according experimental data. Only a certain set of operation parameters in the calculation model was observed to correlate calculated process values with experimental data. Calculation model yields the temperature profile inside the reformer in the direction of the gas flow and the effect of the reformer on the output gas composition in terms of tar content and proportions of gas main components (CO, H<sub>2</sub> CO<sub>2</sub> and H<sub>2</sub>O).Korkea tervapitoisuus tuotekaasussa tekee biomassan hyödyntämisen synteesikaasun tuotannossa haastavaksi. Tervakomponentit täytyy joko eliminoida tai poistaa kaasuvirrasta hyväksyttävälle tasolle. Tässä diplomityössä mallinnetaan teollisen kokoluokan katalyyttisen reformointiyksikön toimintaa yksikön suorituskyvyn arviointia sekä optimointia varten. Mallinnettu reformointiyksikkö on kaksivaiheinen ja se toimii autotermisesti. Puhdistettava synteesikaasu tuotetaan puuperäisestä biomassasta kuplivalla leijukerroskaasuttimella. Osana tätä diplomityötä on myös laadittu Excel laskentamalli, jolla vahvistetaan reformerin toimintaa kuvaavat oletukset ja varmistetaan kokeellisen datan perusteella tehtyjen päätelmien oikeellisuus. Laskentamallilla saadut tulokset vastasivat kokeellisia tuloksia vain tiettyjen reformerin toimintaa kuvaavien parametrien yhdistelmällä. Laskentamallin avulla voidaan laskea reformointiyksikön lämpötilaprofiili kaasuvirran suunnassa sekä reformerin vaikutus ulostulokaasuvirran tervapitoisuuteen sekä kaasun pääkomponenttien (CO, H<sub>2</sub>, CO<sub>2</sub> ja H<sub>2</sub>O) pitoisuuksiin.Description
Supervisor
Koskinen, JukkaThesis advisor
Horvath, AndrasKeywords
biomass, biomassa, gasification, kaasutus, tar, terva, reformer, reformeri