Terahertz radiation detection with a cantilever-based photoacoustic sensor

No Thumbnail Available

Access rights

openAccess

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Date

2022-11-21

Major/Subject

Mcode

Degree programme

Language

en

Pages

9
43417-43425

Series

Optics Express, Volume 30, issue 24

Abstract

We report the photoacoustic (PA) response in the terahertz (THz) range by employing a detection process actuated with a silicon cantilever pressure sensor and a carbon-based radiation absorber. The detection relies on the mechanical response of the cantilever, when the volume of the carrier gas inside the PA cell expands with the heat produced by the radiation absorber. The detector interferometrically monitors the movement of the cantilever sensor to generate the PA signal. We selected the absorber material with the highest THz responsivity for detailed studies at 1.4 THz (214 µm wavelength). The observed responsivities of two different radiation absorbers are nearly the same at 1.4 THz and agree within 10% with responsivity values at 0.633 µm wavelength. The results demonstrate the potential of covering with a single PA detector a broad spectral range with approximately constant responsivity, large dynamic range, and high damage threshold.

Description

Funding Information: Academy of Finland (320167, 314364, 326444). Publisher Copyright: © 2022 OSA - The Optical Society. All rights reserved.

Keywords

Other note

Citation

Sharma, S, Ahmadi, M, Rossi, J, Vainio, M, Sun, Z, Steiger, A & Ikonen, E 2022, ' Terahertz radiation detection with a cantilever-based photoacoustic sensor ', Optics Express, vol. 30, no. 24, pp. 43417-43425 . https://doi.org/10.1364/OE.469295