Nickel Supported on Mesoporous Zirconium Oxide by Atomic Layer Deposition
Loading...
Access rights
openAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2019-08
Major/Subject
Mcode
Degree programme
Language
en
Pages
Series
Topics in Catalysis
Abstract
Atomic layer deposition (ALD) is gaining attention as a catalyst preparation method able to produce metal (oxide, sulphide, etc.) nanoparticles of uniform size down to single atoms. This work reports our initial experiments to support nickel on mesoporous zirconia. Nickel (2,2,6,6-tetramethyl-3,5-heptanedionate)2 [Ni(thd)2] was reacted in a fixed-bed ALD reactor with zirconia, characterised with BET surface area of 72 m2/g and mean pore size of 14 nm. According to X-ray fluorescence measurements, the average nickel loading on the top part of the support bed was on the order of 1 wt%, corresponding to circa one nickel atom per square nanometre. Cross-sectional scanning electron microscopy combined with energy-dispersive spectroscopy confirmed that in the top part of the fixed support bed, nickel was distributed throughout the zirconia particles. X-ray photoelectron spectroscopy indicated the nickel oxidation state to be two. Organic thd ligands remained complete on the surface after the Ni(thd)2 reaction with zirconia, as followed with diffuse reflectance infrared Fourier transform spectroscopy. The ligands could be fully removed by oxidation at 400 °C. These initial results indicate that nickel catalysts on zirconia can likely be made by ALD. Before catalytic testing, in addition to increasing the nickel loading by repeated ALD cycles, optimization of the process parameters is required to ensure uniform distribution of nickel throughout the support bed and within the zirconia particles.Description
HUOM! Löyttyy myös ChemRxiv'ista: https://chemrxiv.org/articles/Nickel_Supported_on_Mesoporous_Zirconium_Oxide_by_Atomic_Layer_Deposition_Initial_Fixed-Bed_Reactor_Study/7204847
Keywords
Atomic layer deposition, Catalyst, Ligand removal, Nickel, Particles, Zirconia
Other note
Citation
Voigt , P , Haimi , E , Lahtinen , J , Cheah , Y W , Mäkelä , E , Viinikainen , T & Puurunen , R L 2019 , ' Nickel Supported on Mesoporous Zirconium Oxide by Atomic Layer Deposition : Initial Fixed-Bed Reactor Study ' , Topics in Catalysis , vol. 7–11 , pp. 611–620 . https://doi.org/10.1007/s11244-019-01133-w